Overview
This ICON Vehicle Dynamics Six Speed Series wheel in Gunmetal, part number ICO1417857345GM, is a 17 by 8.5 inch aluminum split-spoke wheel. It has a 5 on 5 bolt pattern, a 94 center bore, an offset of -6 and a backspacing of 4.5.
ICON designed the Six Speed for Jeep, truck and SUV owners who want a bold look with practical dimensions. Caliper clearance and wheel position were set for suspension travel and steering accuracy. The backspacing and negative offset are intended to reduce scrub radius, which supports steady handling and ride comfort.
Key features
- Gunmetal finish on a split-spoke face
- Aluminum construction in 17 by 8.5 inches
- Negative offset of -6 with backspacing of 4.5
- Caliper clearance named as a design goal
- Scrub radius reduction credited to the backspace and offset
- Six Speed Series styling
Caliper clearance and offset
A negative offset places the mounting face outward, which changes how the wheel sits against the caliper and the fender. Gunmetal finishes show road grime, so rinsing after outings makes it easier to spot cracks or scuffs on the spokes. Check clearance before the first full trail run.
Bolt pattern and center bore are set by the hub, so a split-spoke wheel with a 5 on 5 pattern only fits hubs that match. Once the hub matches, offset and backspacing decide the wheel position. Changes to tire width, lift height or brake size shift that position, so retest the fit after each change.
Wheels with a negative offset put more load on the wheel bearings when the tire sits wide of the hub, so inspect bearings and ball joints at regular intervals if the setup is aggressive.
- Measure hub bolt pattern and center bore first
- Test fit with the tire mounted
- Check steering lock for tire contact
- Recheck lug torque after the first drive
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO1417857345GM |
| Series | Six Speed |
| Style | Split spoke |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 94 |
| Offset | -6 |
| Backspacing | 4.5 |
| Finish | Gunmetal |
| Construction | Aluminum |
| Fitment | Universal fit |
Vehicle fitment
The wheel is a universal fit design, so no single vehicle applies. Measure your hub and compare its bolt pattern and center bore with 5 on 5 and 94 before choosing this wheel. Offset is the second check, since it sets where the wheel sits relative to the fender.
A negative offset moves the mounting face outward, so confirm fender and suspension clearance. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the offset is -6, check tire-to-fender and suspension clearance with a test fit before driving on the wheel.
What’s included
The wheel is sold alone, in Gunmetal, 17 by 8.5 inches.
Not included: Tires, lug nuts and center caps are not included.