Overview
The ICON Vehicle Dynamics Alpha Wheel, 17×8.5 with a 6 on 5.5 bolt pattern in Titanium (part number ICO1217858347TT), is an aluminum mesh wheel meant for Jeep, truck and SUV builds. Its styling leans toward the road while the design aims at off-road work, a balance ICON Vehicle Dynamics describes as both look and function.
The manufacturer explains that the Alpha was shaped for caliper clearance and free suspension travel, and that its backspace and offset were planned to lower scrub radius. That lower scrub radius is presented as helping handling and ride quality. ICON Vehicle Dynamics positions the wheel alongside its suspension systems, and because it is universal, the bolt pattern and offset must be checked against your own vehicle.
Key features
- Mesh design with a Titanium finish
- 17 inch diameter and 8.5 inch width
- 6 on 5.5 bolt pattern and 106 center bore
- Offset 0 and backspacing 4.8
- Aluminum construction, Alpha series
Test fitting before tires
A test fit shows problems that a bench check cannot. With the wheel on the hub and lug nuts snug, turn the steering fully side to side and watch for contact with calipers, brake lines and suspension arms. Rotate the wheel by hand to check for rubbing at each point of travel.
Mounting face position controls how the wheel sits relative to the brakes and fenders. Once clearance is confirmed, mount the tire and recheck, since a tire adds width and changes the stance. Keep a torque wrench handy and recheck lug nut tension after the first few drives on new wheels.
- Test fit before adding tires
- Watch for brake line contact
- Recheck lug nut tension after the first drives
- Note any rubbing and correct it before driving
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO1217858347TT |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 106 |
| Offset | 0 |
| Backspacing | 4.8 |
| Style | Mesh |
| Finish | Titanium |
| Construction | Aluminum |
| Series | Alpha |
| Fitment | Universal Fit |
Vehicle fitment
Universal Fit means the wheel is not tied to a particular model year or make. Hub compatibility is left to the owner, so check the 106 center bore and 6 on 5.5 pattern before mounting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An offset of 0 with 4.8 backspacing sets the mounting face position, so confirm caliper and suspension clearance after fitting. Measure your hub’s diameter before mounting, since the center bore alone does not confirm hub fit.
What’s included
The wheel comes alone, with no accessories in the package. Tires are separate.
Not included: Tires are not part of this wheel.