Overview
The ICON Vehicle Dynamics Vector 6 in bronze is a 17×8.5 aluminum split spoke wheel, part number ICO2417858357BR, with a 6 on 5.5 bolt pattern, center bore 93, offset 25 and backspacing 5.75. It is universal fit, so it is not built for one model. Because the offset is 25, check brake and fender clearance on your own vehicle before choosing it.
The Vector 6 has sharp lines, an aggressive spoke pattern and a featureless lip that is easier to care for. Its ICON-optimized dimensions are meant to improve the form and function of a truck or SUV, with backspace and offset chosen to reduce scrub radius. These are design goals, and real handling depends on your setup and tires.
Key features
- Split spoke design with sharp lines
- Featureless lip that ICON says is easier to maintain
- 6 on 5.5 bolt pattern with center bore 93
- Offset 25 and backspacing 5.75
- Bronze finish on aluminum construction
- 17 Inches diameter and 8.5 Inches width
Bronze finish and fender room
A positive offset of 25 places the mounting face closer to the brake side, which pulls the wheel inward. That can help keep the tire away from the outer fender but may bring the back of the wheel closer to brake calipers and suspension parts. Check both sides at full steering lock, and recheck after any suspension change.
Bronze finishes hide road dirt better than bright silver but can show brake dust and tar. Wash with mild soap and a soft mitt, and avoid strong degreasers that can fade the finish over time. Check the hub face for corrosion whenever the wheel comes off for tire service.
- Measure brake caliper clearance with the wheel mounted
- Use a soft mitt on the bronze finish
- Check the hub face for rust before remounting
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO2417858357BR |
| Series | Vector 6 |
| Style | Split Spoke |
| Wheel diameter | 17 Inches |
| Wheel width | 8.5 Inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 93 |
| Offset | 25 |
| Backspacing | 5.75 |
| Finish | Bronze |
| Construction | Aluminum |
| Fitment | Universal fit |
Vehicle fitment
This wheel is universal fit, so it is not designed for a single vehicle. Compare the 6 on 5.5 bolt pattern, center bore 93, offset 25 and backspacing 5.75 with your hub before ordering a set. Have fender clearance measured if the vehicle has a lift.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 93 center bore must sit on the hub’s pilot, and the 6 on 5.5 pattern should line up with the studs before lug nuts go on. Verify brake and fender clearance with the offset of 25 at full steering lock before driving.
What’s included
Confirm whether tires, lug nuts or center caps are needed for your installation before ordering.