Overview
The ICON Vehicle Dynamics Rebound 17×8.5 in satin black, part number ICO1817856350SB, is a spoke wheel in aluminum with a 6 on 135 bolt pattern. Its 87 center bore and offset of 6 target trucks, SUVs and Jeeps that run this pattern.
A backspacing of 5 is one of the figures ICON associates with reduced scrub radius and steadier steering. The brand adds that the Rebound’s spoke face was shaped for brake caliper clearance and full suspension articulation. Fitment is labeled Universal Fit, but no year or model is written out, so the hub check carries the decision.
Key features
- Satin black finish on a spoke face
- Aluminum build at 17 by 8.5 inches
- Offset of 6 with backspacing of 5
- Center bore of 87 for a 6 on 135 hub
- Caliper clearance focus in ICON’s design notes
Tire choice and balance
The tire is the other half of a wheel setup, and its size affects clearance, speedometer reading and load. A tire that is too wide for the wheel can change sidewall bulge and bead seating, while an oversized tire can rub at full lock or against the suspension. Choose a tire that fits the wheel’s width range and the clearances measured on your vehicle.
Have the assembly balanced after mounting, since an unbalanced wheel can cause vibration that feels like a steering or bearing fault. Satin finishes show brake dust and tire dressing more readily, so clean the face with a gentle cleaner after balancing. Check the tire valve and cap fit, because a valve that is damaged or missing can slow seating.
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO1817856350SB |
| Series | Rebound |
| Style | Spoke |
| Diameter | 17 Inches |
| Width | 8.5 Inches |
| Bolt pattern | 6 on 135 |
| Center bore | 87 |
| Offset | 6 |
| Backspacing | 5 |
| Finish | Satin Black |
| Construction | Aluminum |
| Fitment label | Universal Fit |
Vehicle fitment
This satin black wheel has no year, make, model or trim named. Compare the 6 on 135 pattern and 87 center bore with your hub, since those two figures decide whether it mounts properly.
A wheel can clear the bolt pattern yet still sit off-center if the center bore differs, so measure before choosing it. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test fit the satin black wheel and confirm it sits centered on the 87 bore before tightening anything. Recheck clearance once the tire is installed, and use lug fasteners rated for this wheel.
What’s included
One aluminum wheel is covered here. Lug nuts, center caps and valve stems are not included.
Not included: Tire and mounting hardware are not included with this wheel and must be obtained separately.