Overview
Part number ICO1217858347GM identifies this Alpha Series wheel from ICON Vehicle Dynamics. It measures 17 inches across with an 8.5 inch width, uses a 6 on 5.5 bolt pattern, and has a center bore of 106.
The Alpha blends on-road looks with off-road capability. It is engineered for caliper clearance and a wheel position that allows free suspension travel. An offset of 0 and backspacing of 4.8 help reduce scrub radius, which supports handling and ride quality for Jeep, truck and SUV use.
Key features
- Mesh style with a gunmetal finish
- Aluminum construction
- 6 on 5.5 bolt pattern
- Center bore of 106
- Offset of 0 and backspacing of 4.8
- Part of the Alpha Series from ICON Vehicle Dynamics
Choosing a 6 on 5.5 wheel
Six-stud patterns spread load across more fasteners, which helps on heavier trucks and SUVs. The 106 center bore is also important. A bore larger than the hub pilot relies on the studs to center the wheel, so hub-centric rings are worth checking. Measure the pilot before you buy, and confirm the stud circle matches the hub.
Zero offset moves the tire outward relative to a positive offset, which changes steering load and scrub. Tire width matters too, since a wider tire on the same wheel may rub the fender at full lock. Inspect the inner fender and suspension after the first drive with the new wheels, and keep a record of the setup for future reference.
- Measure the hub pilot before mounting
- Check fender clearance at full steering lock
- Verify tire width against the wheel width
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO1217858347GM |
| Series | Alpha |
| Style | Mesh |
| Finish | Gunmetal |
| Construction | Aluminum |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 106 |
| Offset | 0 |
| Backspacing | 4.8 |
| Fitment | Universal fit |
Vehicle fitment
This wheel is universal fit, so it is not built around one vehicle. Use the 6 on 5.5 bolt pattern and 106 center bore as the first points of comparison with your hub.
Without model years or chassis codes, nothing here confirms or rules out a specific vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the 6 on 5.5 pattern and the 106 center bore against your hub measurements before fitting. Offset and backspacing decide where the wheel sits in the fender, so inspect clearance once it is on the hub. An incorrect bolt pattern is a serious hazard, so do not mount the wheel until it matches exactly.
What’s included
Confirm whether lug nuts, center caps and a tire are needed for your installation, and check the quantity you plan to mount.
Not included: A tire and any lug hardware, to be sourced for mounting.