Overview
The ICON Vehicle Dynamics Rebound PRO in titanium is a 17×8.5 inch aluminum wheel with a 6 on 5.5 bolt pattern and part number ICO21817858357TT. It carries an offset of 25 and a backspacing of 5.75. It is offered for trucks, Jeep models and SUVs.
The design is built around InnerLock, a patent pending bead retention system that holds the tire bead in place at reduced pressures while remaining fully DOT compliant. Beadlock wheels need regular upkeep, special tools and parts, add rotational mass and cannot be used legally on public roads. Thousands of miles of real-world testing have been completed, and the wheel passed an FMVSS No.139 bead unseat test modified to 10 psi, exceeding the test machine’s limits at over 7600lbs of load. The offset and backspacing were set to improve caliper clearance and reduce scrub radius.
Key features
- Patent pending InnerLock bead retention
- Fully DOT compliant.
- Titanium finish on aluminum construction
- Offset 25 and backspacing 5.75 for caliper clearance
- Load rating of 3,200lb from strength testing.
Bead retention explained
Bead retention keeps the tire bead seated against the wheel bead seat when the tire runs at lower pressure. Low pressure is common off-road because it increases the contact patch and traction on loose surfaces. A bead that unseats can cause a sudden loss of air, so a system designed to hold the bead is a practical feature for that use.
Traditional beadlock wheels rely on mechanical clamps that need regular checks, tools and replacement parts. A bead retention design such as InnerLock avoids those extra parts, which can simplify upkeep. Even so, the tire should be mounted by a qualified shop, because proper bead seating is required before pressure is lowered.
Check the bead and rim lip after any hard landing or rock strike, and look for air loss or uneven tread wear. Keep the tire pressure monitoring system in mind as well, since off-road pressure changes can affect its readings. Clean the bead area whenever the tire is changed so the seal stays clean.
- Seat the bead before reducing pressure
- Inspect the rim lip after rock strikes
- Check for slow air loss after trail runs
- Factor caliper clearance into tire choice
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO21817858357TT |
| Style | Rebound |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 6 on 5.5 |
| Offset | 25 |
| Backspacing | 5.75 |
| Finish | Titanium |
| Construction | Aluminum |
| Bead retention | InnerLock technology (patent pending) |
| Load rating | 3,200lb (ICON strength test) |
| Bead test | FMVSS No.139 Tire Bead Unseat Resistance Test, modified to 10 psi |
Vehicle fitment
This wheel carries a Universal Fit designation, and no specific truck or SUV is tied to it. Check the 6 on 5.5 bolt pattern, offset 25 and backspacing 5.75 against your own vehicle before ordering. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check caliper and suspension clearance with the offset and backspacing before mounting, and allow for your tire size. Mount the wheel through a qualified tire shop, since bead seating is critical when running low pressures off-road.
What’s included
No hardware or accessories come with this titanium wheel. Confirm the package contents on arrival.



