Overview
The ICON Vehicle Dynamics Alpha 17×8.5 wheel in Bronze, part number ICO1217856350BR, is a 17-inch mesh aluminum wheel that measures 8.5 inches wide, with a 6 on 135 bolt pattern and an offset of 6. ICON Vehicle Dynamics positions it for Jeep, truck and SUV owners who want on-road styling with off-road capability.
The Alpha is built for brake caliper clearance and to keep suspension travel and steering unrestricted. Its backspace and offset were set to reduce scrub radius, which supports better handling and ride quality. Fit depends on bolt pattern, center bore and clearance, covered in the fitment section below.
Key features
- Mesh spoke style in a Bronze finish
- 17-inch diameter and 8.5-inch width
- 6 on 135 bolt pattern with an offset of 6
- Backspacing of 5 and a center bore of 87
- Aluminum construction
- Designed for caliper clearance and suspension travel, per the brand
- Part of the Alpha series from ICON Vehicle Dynamics
Before you mount
Mounting work is where most fit problems show up. Test fit the wheel with the tire you plan to run, then check that it turns freely at full lock and clears the caliper through the whole range of suspension travel. Bronze finishes can show scratches from tire irons, so use a bead breaker with protective pads and avoid metal edges on the rim.
Backspacing and offset decide how the tire sits in the fender, so a change in tire width can alter rub points even when the wheel stays the same. Pair the wheel with lug nuts that match the seat type, and torque them in a star pattern after the first drive. Inspect the wheel after the first few trail runs for cracks near the spokes.
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO1217856350BR |
| Series | Alpha |
| Wheel diameter | 17 Inches |
| Wheel width | 8.5 Inches |
| Bolt pattern | 6 on 135 |
| Offset | 6 |
| Center bore | 87 |
| Backspacing | 5 |
| Style | Mesh |
| Finish | Bronze |
| Construction | Aluminum |
| Fitment | Universal Fit |
Vehicle fitment
This wheel is universal fit, so it is not tied to a particular year, make or model. Whether it clears your hub depends on the 6 on 135 bolt pattern, the 87 center bore, the offset and your brake and suspension clearance.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check whether a hub-centric ring is needed to match the 87 center bore to your hub. Measure clearance to the caliper and fender with your planned tire size before mounting, because the 5 backspacing and 6 offset together determine how far the wheel sits in the wheel well.
What’s included
The wheel is the only item covered here. Plan to source lug nuts, center caps and tires separately before mounting.