Overview
An 18×9 bronze spoke wheel, ICON Vehicle Dynamics part ICO1818908152BR, with an 8 on 170 bolt pattern, is listed in the Rebound HD series. It has a 125 center bore, offset 6 and backspacing 5.25.
The concave spoke design uses dimensions tuned for caliper clearance and unhindered suspension travel and steering. Backspacing and offset are set to reduce scrub radius, which affects handling and ride quality, and the wheel is aimed at Jeep, truck and SUV owners who want a bolder look.
Key features
- Concave spoke design
- Dimensions set for caliper clearance
- Backspacing and offset tuned to reduce scrub radius
- Bronze finish on aluminum construction
- Rebound HD series wheel
Care and fit checks
A bronze finish shows fingerprints and brake dust differently than black, so a pH-neutral wheel cleaner and a soft brush suit routine care. Avoid abrasive pads, which can dull the clear coat over time.
An 18×9 wheel leaves little room between the tire bead and the fender lip. Check clearance at full turn, at full compression and with any load in the bed or cargo area, because weight changes suspension height.
Backspacing and offset determine how the mounting face sits in the wheel well. Lifts change the geometry, so test fit after any suspension work, and use hub-centric rings if the hub is smaller than the bore.
- Test fit with the final tire
- Clean the spokes with a soft brush
- Replace bent or cracked wheels rather than repairing them
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO1818908152BR |
| Series | Rebound HD |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Bolt pattern | 8 on 170 |
| Center bore | 125 |
| Offset | 6 |
| Backspacing | 5.25 |
| Style | Spoke |
| Finish | Bronze |
| Construction | Aluminum |
Vehicle fitment
No year, make or model is attached to this 18×9 wheel, so no vehicle fitment is confirmed. Universal Fit is the only fitment label, and the 8 on 170 bolt pattern and 125 center bore must be matched to the hub on your Jeep, truck or SUV.
Since no vehicles are named, the models this wheel may leave out cannot be determined. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 9-inch-wide wheel in an 18-inch diameter can run close to the fender lip, brake caliper and steering components, so test-fit the wheel and tire together before final mounting. Backspacing of 5.25 and offset of 6 set where the mounting face sits, which matters when a lift or larger tire is involved; have a shop confirm the setup in those cases.
What’s included
The wheel is sold alone. Hardware such as lug nuts is needed separately, and center caps and valve stems should be confirmed before mounting.

