Overview
The ICON Vehicle Dynamics Rebound 17×8.5 in satin black, part number ICO1817857345SB, is an aluminum spoke wheel with a 5 on 5 bolt pattern, a center bore of 72 and an offset of -6. It suits Jeep, truck and SUV owners who want a concave spoke face on a wheel dimensioned for this exact hub pattern.
Backspacing is listed at 4.5. ICON Vehicle Dynamics says these offset and backspace figures were developed to reduce scrub radius for steadier handling, and that the Rebound was engineered to maximize caliper clearance and allow unrestricted suspension travel. Fitment is labeled Universal Fit, yet no year, make, model or chassis is named, so confirm the hub match before mounting.
Key features
- Concave spoke design with sharp lines
- Aluminum construction in a 17 inch by 8.5 inch size
- Satin black finish
- Offset of -6 and backspacing of 4.5, developed to reduce scrub radius
- Center bore of 72 and a 5 on 5 bolt pattern to match your hub
Choosing a concave spoke wheel
Concave spoke faces change how a wheel looks and how much room it needs. The deeper center section can reduce clearance around the brake caliper, so check the inside of the spokes against your caliper before mounting. Offset and backspacing control how far the wheel sits in the wheel well, which affects both fender clearance and rubbing at full steering lock.
Wheel spacers, wider tires and lift components all change those measurements, so test the combination together rather than the wheel alone. Lug seat style also deserves a look, since a mismatched seat can loosen under load. After the first drives, inspect the spokes for stone chips and cracks near the center pad, and re-torque the lug nuts.
- Check caliper clearance inside the spokes
- Test fit with the tire you plan to run
- Review the lug seat type before tightening
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO1817857345SB |
| Series | Rebound |
| Style | Spoke |
| Diameter | 17 Inches |
| Width | 8.5 Inches |
| Bolt pattern | 5 on 5 |
| Center bore | 72 |
| Offset | -6 |
| Backspacing | 4.5 |
| Finish | Satin Black |
| Construction | Aluminum |
| Fitment label | Universal Fit |
Vehicle fitment
No year, make, model or trim is assigned to this satin black wheel, so it is not matched to a specific vehicle. The 5 on 5 bolt pattern and center bore of 72 are the checks to run against your hub.
A wheel with a different bolt pattern, center bore or offset will not seat the same way. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test fit the 5 on 5 bolt pattern and center bore of 72 against your hub before the tire goes on. Offset -6 moves the mounting face outboard, so check brake and fender clearance with the tire you plan to run. Use lug fasteners rated for this wheel and tighten them in a crisscross sequence.
What’s included
This is one aluminum wheel, with no lug nuts, center caps or valve stems included.
Not included: A tire and any lug hardware are not part of this wheel and must be obtained separately.