Overview
Satin Black is the finish on this ICON Vehicle Dynamics Alpha 17×8.5 wheel, part number ICO1217856350SB. It is a 17-inch mesh aluminum wheel, 8.5 inches wide, with a 6 on 135 bolt pattern, offset 6 and backspacing 5, aimed at Jeep, truck and SUV owners who want a darker, street-leaning look.
The Alpha is described by ICON Vehicle Dynamics as built to maximize caliper clearance and to optimize wheel position so suspension travel and steering stay unrestricted. Its backspace and offset were chosen to reduce scrub radius, a change the brand links to smoother handling and ride. The brand presents it as a match for an ICON suspension, but fit still depends on the measurements below.
Key features
- Satin Black finish on a mesh spoke design
- 17-inch by 8.5-inch aluminum wheel
- 6 on 135 bolt pattern
- Offset 6, backspacing 5 and center bore 87
- Wheel position tuned for steering and suspension travel, per the brand
- Part of the Alpha series
Choosing the right setup
A wheel with a 6 on 135 pattern and a center bore of 87 needs to match the hub on both counts. If the hub bore is smaller than the center bore, the wheel will not seat correctly, so measure before buying. Backspacing affects how close the inner face runs to the brake caliper, which matters on lifted trucks with larger brakes.
Mesh spokes collect road grime, so a soft brush and mild soap keep the satin finish looking even. Brake dust is easier to remove when the wheel is cleaned on a regular schedule. Inspect the spoke edges and lip for chips after rough trail use.
- Measure the hub bore before ordering a centering ring
- Check brake caliper clearance with the wheel fitted
- Use a soft brush to protect the satin finish
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO1217856350SB |
| Series | Alpha |
| Wheel diameter | 17 Inches |
| Wheel width | 8.5 Inches |
| Bolt pattern | 6 on 135 |
| Offset | 6 |
| Center bore | 87 |
| Backspacing | 5 |
| Style | Mesh |
| Finish | Satin Black |
| Construction | Aluminum |
| Fitment | Universal Fit |
Vehicle fitment
Universal fit is the classification ICON Vehicle Dynamics gives this wheel, so no particular year, make or model is named for it. Measure your hub’s bolt pattern and center bore against the figures above, and check brake caliper room, before fitting a set.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A hub-centric ring may be needed if the hub hole is smaller than the 87 center bore. Fit the ring before the wheel goes on, since the wheel must sit centered on the hub.
What’s included
The package is the wheel only, in Satin Black. Lug hardware, center caps and tires are not included and need to be sourced separately.