Overview
The High Lifter Products SPRP-ADAPTER is a spring adapter kit for Polaris models from 2011 to 2016. It is required when installing High Lifter springs on 2011–2014 models that have the stamped steel spring adjustment collar instead of the older aluminum collar.
One adapter kit is needed for each individual front or rear spring kit. The adapter ring slides over the shock body and sits on top of the factory adjustment collar, which is the step that makes the High Lifter spring fit on these models.
Key features
- Required for High Lifter springs on 2011–2014 models with a stamped steel collar
- One kit needed for each front or rear spring kit
- Adapter ring slides over the shock body
- Raised shock centering ring
Before you install
Spring adapters sit between the factory parts and the new spring, so their job is about geometry. A shock that is seated correctly keeps the spring centered and reduces side loading on the shock body. Before removing anything, note how the factory collar is positioned so the new arrangement lines up the same way.
Collars and shock bodies wear over time. Look for cracked, bent or loose collars, rust on the threads, and any sign of oil around the shock seals. Replacing a worn collar before adding a new spring prevents uneven ride height. When raising or lowering a suspension, re-check the ride height and the alignment of the adapter after the first few rides.
- Clean the shock body before fitting the adapter ring
- Check the collar for cracks or looseness
- Re-check ride height after the first rides
Specifications
| Brand | High Lifter Products |
|---|---|
| Part number | SPRP-ADAPTER |
| Application | High Lifter front or rear spring kits |
| Fit range | 2011–2016 Polaris models |
| Collar type | Stamped steel, 2011–2014 models |
Vehicle fitment
It fits 2011–2016 Polaris models, and the 2012 Polaris Ranger RZR 800 (Base) is covered.
Coverage is for the 2012 model only. It is required on 2011–2014 models with the stamped steel collar. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Remove the factory spring and slide the adapter ring over the shock body. Place it on top of the factory adjustment collar with the raised shock centering ring facing up. Install the High Lifter spring and reassemble the shock.
What’s included
One spring adapter kit.
Not included: the High Lifter front or rear springs that this adapter is used with.









