Overview
The Go Rhino BR20 rear replacement bumper 28178T is a textured black powder-coated replacement rear bumper for the 2014–2017 Toyota Tundra. Integrated steps give easier access to the truck bed.
Like the other BR20 bumpers, it has integrated D-shackle mounts, license plate light and trailer light plug provisions, a spare tire crank port and a reverse sensor port. The optional Rear Light Plate accessory carries Rigid D-Series Dually or compatible LED lights. Tundras with a factory rear hitch need modification, and the bumper is not compatible with Blind Spot Monitor (BSM) or Rear Cross-Traffic Alert (RCTA).
Key features
- Textured black powder-coat replacement bumper
- Integrated steps for the truck bed
- Integrated D-shackle mounts (shackles not included)
- Provisions for license plate lights and a trailer light plug
- Spare tire crank access port and reverse sensor port
- Not compatible with Blind Spot Monitor (BSM) and Rear Cross-Traffic Alert (RCTA)
- Models with a factory rear hitch require modification
Before you buy
A rear bumper does more than protect the back of the truck. It anchors the hitch area, carries the license plate and lights, and on some setups holds accessories that tie into the wiring. Before the old bumper comes off, look at where the wiring plugs, sensor leads and spare tire crank will route to the new unit, so nothing has to be pulled apart halfway through the job.
Integrated steps add useful reach to a bed that sits high, but they also carry weight and take hits from gear. After the first few weeks of use, check the mounting bolts and the step edges for looseness, cracks or peeling coating. Touch-up paint on chips slows corrosion on the steel, and a periodic wipe-down keeps road salt from sitting on the finish.
Specifications
| Brand | Go Rhino |
|---|---|
| Part number | 28178T |
| UPC | 887753087164 |
| Product type | Replacement rear bumper (BR20) |
| Finish | Textured black powder coat |
| D-ring mount | Included |
| Receiver hitch | No |
| Tire carrier | No |
| Position | Rear |
| Fit type | Direct fit |
| Not compatible with | Blind Spot Monitor (BSM), Rear Cross-Traffic Alert (RCTA) |
Vehicle fitment
It is made for the 2014–2017 Toyota Tundra.
Tundras equipped with BSM or RCTA are not compatible. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
On Tundras with a factory rear hitch, Go Rhino says modification is required to install the bumper.
What’s included
One BR20 replacement rear bumper with integrated steps and D-shackle mounts.
Not included: D-shackles, the optional Rear Light Plate accessory and LED lights.









