Overview
The Go Rhino BR20 rear replacement bumper, part number 28171T, is a textured black rear bumper that replaces the original unit. It offers integrated steps, D-shackle mounts and lighting provisions, and it is compatible with rear park assist.
Match the year, model and trim to your truck before choosing this bumper.
Key features
- Integrated steps give easier access to the truck bed
- Integrated D-shackle mounts, shackles not included
- Provisions for license plate lights and a trailer light plug
- Port for the spare tire crank and a reverse sensor mounting port
- Compatible with rear park assist
- Optional Rear Light Plate accessory for Rigid D-Series Dually or compatible LED lights
Park assist and rear sensors
Park assist sensors detect objects behind the vehicle, and their mounting position affects how accurately they read. When a replacement bumper is installed, the sensors and their cable should be checked against the new bumper before final mounting. Plan the cable route early to avoid pinching the wiring.
Keep the sensor face clean and free of mud or ice, since buildup can cause false readings. Recheck the sensor alignment after the first trail runs or any impact, and replace a cracked sensor rather than trying to bond it. Park assist is an aid, so keep watching the rear while reversing.
Route lighting and trailer wiring away from the sensor wiring to reduce interference, and use fused circuits for any added lights. Keep the reverse sensor port covered when no sensor is installed to keep out dirt.
Specifications
| Brand | Go Rhino |
|---|---|
| Part number | 28171T |
| UPC | 887753105516 |
| Finish | Textured black |
| Position | Rear |
| Shackles | Not included |
| Park assist | Compatible |
Vehicle fitment
Check the bumper’s mounting against your truck’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Route license plate light and trailer light wiring through the provisions before final mounting. Check that park assist sensors match the reverse sensor mounting port before installing.
What’s included
The bumper with its integrated D-shackle mounts and light provisions.
Not included: D-shackles and the optional Rear Light Plate accessory, plus any LED lights or trailer wiring.









