Overview
The G2 Axle and Gear 85-2013M-31 is a mini spool for Ford 8.8 inch rear axles with 31 splines. It offers a traction option with lower set-up demands than many alternatives, and the unit is CNC machined from 4130 billet steel.
The 31 spline count is the key check. Axle shafts with a different count will not mate with this spool, so identify the shafts in your housing before choosing it. This part covers Ford 8.8 inch rear axles only.
Key features
- 31 spline fitting for Ford 8.8 inch rear axles
- CNC machined from 4130 billet steel
- Mini spool format, as named by the brand
- Lower set-up demands than many traction alternatives, per the maker
Setting up a mini spool
A mini spool is a different part from a full spool or an open carrier, so the first step is matching the item type to the build. A spool ties both axle shafts to one speed, which gives drive to a wheel with no grip. The trade is less refined turning on pavement, where the rear wheels cannot rotate at different speeds.
Plan the job around the carrier. Removing it, setting ring gear backlash and bearing preload, and checking the gear pattern are all part of a proper install. Ask the shop to inspect the axle shafts and bearings while the housing is open, because worn parts are much easier to replace at that stage than after reassembly.
- Axle shaft spline count
- Housing type and size
- Ring gear, pinion and bearing set
- Carrier body and fresh gear oil
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 85-2013M-31 |
| UPC | 631410103571 |
| Axle type | Ford 8.8 inch |
| Popular axle manufacturer | Ford |
| Axle location | Rear |
| Axle spline | 31 splines |
| Differential type | Spool |
| Material | 4130 billet steel |
Vehicle fitment
This spool is universal fit for Ford 8.8 inch axles. The housing size and spline count are the deciding checks, since no model years or chassis codes come with it.
A mini spool is a different part from a full spool or an open carrier, so match the item type to your build. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The carrier has to come out for spool installation, and ring gear backlash and bearing preload need correct setting once it is back in. A shop with carrier setup experience is the practical route.
What’s included
The spool unit only.
Not included: a separate ring gear, pinion, bearing set and carrier body are required.







