Overview
The G2 Axle and Gear 85-2034-4 is a full spool for rear Dana 60 axles with 35 splines, for use with 4.56 Up gears. A full spool joins the axle shafts so both wheels turn with the same power, including when one wheel is in the air. G2 Axle and Gear CNC machines it from billet 4130 steel and heat treats it for durability.
Key features
- Heat treated for durability
- Designed for 35 spline axle shafts
- Built for 4.56 Up gearing
- Not recommended for front axles
- Not compatible with C clip axles
- Billet 4130 steel, CNC machined
Checking axle type first
Axle type decides whether a spool can go in at all. C clip and non-C clip axles use different retention methods, and a spool designed for one style cannot simply be bolted into the other. Pull a shaft or check the axle end before ordering so you know which retention style you run.
Ring gear and pinion condition also matter with a higher ratio such as 4.56 Up. Gears close to the end of their life tend to whine under load once the spool is locked. Inspect the tooth contact, look for pitting and replace bearings that feel rough when turned by hand. Many builders replace the bearing set and pinion seal at the same time as the spool. Taking time at this step prevents a costly return trip.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 85-2034-4 |
| UPC | 631410103427 |
| Differential type | Spool |
| Material | CNC machined billet 4130 steel, heat treated |
| Axle type | Dana 60 |
| Axle location | Rear |
| Axle spline | 35 splines |
| Gear ratio | 4.56 Up |
| Fitment listed | Universal fit for Dana 60 rear axles |
Vehicle fitment
This spool is not tied to a single vehicle. Its stated use is rear Dana 60 axles with 35 spline shafts and 4.56 Up gears, so the axle housing, spline count and axle design decide fit.
The 30 spline version, 85-2034-4-30, is a separate part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A spool changes how the axle shafts share power, so a gear pattern check after installation is the usual step. Because it is not for C clip axles, confirm your axles are not C clip type before ordering.
What’s included
Only the spool is included.
Not included: Bearings, ring gear, pinion and installation hardware are not included.







