Overview
The G2 Axle and Gear 30-8020 is a front wheel bearing kit for the Dana 60 front axle on the 1990–1993 Dodge W350, with all parts for one side.
The kit pairs a Timken inner bearing and race with a Timken outer bearing and race and a wheel bearing seal. G2 Axle and Gear describes its kits as the items needed to replace front or rear wheel bearings.
The kit is for the Dana 60 front axle on the 1990–1993 Dodge W350, and the title reads 90-93 Dodge front Dana 60.
Owners with a Dana 60 from another truck should check the bearings before ordering. Confirm fit using the kit number and your vehicle’s year, model and trim, especially when the axle came from a different truck.
Key features
- All parts for one side
- Timken inner wheel bearing and race
- Timken outer wheel bearing and race
- Wheel bearing seal
- For the Dana 60 front axle
- Front position
Heavy axle hub care
The Dana 60 carries heavy loads, and its hubs and steering knuckles see more stress than lighter front axles. Bearing wear often starts with grease that has been contaminated by water or dirt through a worn seal. Clean the spindle and knuckle bore when the hub is apart, and check for any looseness in the knuckle bushings.
Larger tires and gearing put additional load on every wheel end, so bearing life can shorten if the truck is driven hard. Pack with grease that suits the bearing type, and replace the hub seal with the bearing. Inspect the bearing condition more often after any change in tire size.
- Check the hub and spindle for wear
- Repack with grease suited to the bearing
- Replace the seal along with the bearing
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 30-8020 |
| UPC | 631410095371 |
| Part type | Front wheel bearing kit |
| Bearing brand | Timken |
| Axle | Dana 60 front |
| Position | Front |
| Kit coverage | All parts for one side |
Vehicle fitment
The kit fits this vehicle:
- 1990–1993 Dodge W350 (Base)
Only the 1990–1993 Dodge W350 is listed. The W250, other model years and Ford trucks with a Dana 60 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Each kit serves one wheel end, so plan on two kits for the full axle and pack the bearings with fresh grease.
What’s included
A Timken inner bearing and race, a Timken outer bearing and race and a wheel bearing seal, for one side.
Not included: bearing grease and the matching kit for the opposite wheel end.
