Select your vehicle

FUEL Off-Road Shok D665 Wheel, 18x9 with 6 on 139.7 Bolt Pattern – Matte Gunmetal – D66518908450

FUEL Off-Road

Shop FUEL Off-Road Wheels 18x9 on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • FUEL Off-Road Shok D665 wheel, 18 by 9 inches, aluminum spoke style
  • Part number MHTD66518908450
  • 6 on 139.7 bolt pattern, center bore 106, offset 1, backspacing 5
  • Matte gunmetal finish
  • Universal fit label; match 6 on 139.7 to your hub

Description

Overview

The FUEL Off-Road Shok D665 is an 18 by 9 inch aluminum spoke wheel, part number MHTD66518908450, with a 6 on 139.7 bolt pattern and a matte gunmetal finish. The maker labels it universal fit, so whether it works on a given truck depends on matching the hub.

Gunmetal is a grey metallic tone, and the matte finish keeps the surface non-glossy. The 106 center bore, offset of 1 and backspacing of 5 are the measurements to compare with your current wheels before selecting a size.

Key features

  • 18-inch diameter and 9-inch width in a spoke style
  • Aluminum construction
  • 6 on 139.7 bolt pattern
  • Offset of 1, center bore of 106 and backspacing of 5
  • Matte gunmetal finish
  • Listed by the maker as universal fit

Wheel care and hub cleaning

Before mounting, clean the hub face and the back of the wheel so rust, paint or grit does not sit between them. Loose debris can cause the wheel to seat unevenly, and lug nuts can then loosen as the surfaces settle. A soft brush and mild cleaner are enough for most hubs, and a wire brush should only be used on rust, not on the finish.

A matte gunmetal finish usually needs gentler cleaning than a gloss surface. Avoid abrasive pads and polishing compounds, which can change the sheen. Rinse the wheel after mud or salt exposure, and inspect the spoke junctions and lip after rough trail runs for chips or cracks that may need professional review.

  • Clean the hub face before every mount
  • Use a mild cleaner on the matte finish
  • Inspect spoke junctions after hard trail use

Specifications

Brand FUEL Off-Road
Part number MHTD66518908450
Model Shok D665
Wheel diameter 18 inches
Wheel width 9 inches
Bolt pattern 6 on 139.7
Offset 1
Center bore 106
Backspacing 5
Style Spoke
Finish Matte gunmetal
Construction Aluminum
Fit type Universal fit

Vehicle fitment

This wheel is a universal fit design rather than a model-specific one. Measure your hub and confirm the 6 on 139.7 pattern and 106 center bore before selecting it for a particular vehicle.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Tires need separate mounting. Check the offset and backspacing against brake calipers and fender clearance, and confirm the 106 center bore fits the hub before the first drive.

What’s included

The wheel is the only component in this package. Check the package contents against your installation before starting.

SKU: MHTD66518908450 Categories: ,

Questions & Answers

What is the FUEL Off-Road Shok D665 part number MHTD66518908450?

It is an 18 by 9 inch aluminum spoke wheel in matte gunmetal finish with a 6 on 139.7 bolt pattern. The part number MHTD66518908450 identifies it. The offset is 1, the center bore is 106 and the backspacing is 5.

Which vehicles fit the Shok D665?

It is a universal fit wheel, so it does not target one make, model or year. Match the 6 on 139.7 bolt pattern and 106 center bore to your hub before deciding whether it suits your truck.

Is the bolt pattern 6 on 139.7?

Yes. The listed bolt pattern is 6 on 139.7, with a center bore of 106. Measure your hub before mounting and confirm the match, because a different pattern will not bolt on correctly.

Are tires included with this wheel?

No, tires, lug nuts and center caps are not part of the wheel. Plan to arrange tires and fasteners separately and choose a tire that suits the 18-inch diameter and 9-inch width.

Is it safe to wash a matte finish wheel with a pressure washer?

A pressure washer can be used at a moderate distance, but keep the nozzle away from the bead and valve area. Use a pH-neutral cleaner and avoid abrasive pads, since they can dull a matte surface. Rinse thoroughly after washing.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop FUEL Off-Road Wheels 18x9 on Amazon