Overview
The FUEL Off-Road Vapor D560 20×9 is a 20-inch split spoke aluminum wheel in matte black, part number MHTD56020901850, built around a single 8 on 180 bolt pattern. It is 9 inches wide, with an offset of 1 and a center bore of 124.
Backspacing is 5. Confirm that your hub matches the 8 on 180 pattern before comparing any other measurement.
Key features
- 20-inch diameter and 9-inch width
- Single 8 on 180 bolt pattern
- Split spoke design in matte black
- Center bore of 124, offset 1 and backspacing 5
Single pattern and hardware choice
A single 8 on 180 pattern keeps the choice simple, because the hub either matches it or it does not. The 124 center bore then decides how the wheel centers, and the offset of 1 and backspacing of 5 set how the wheel sits against the brakes and suspension. Those three values together matter more than appearance when deciding whether a wheel is suitable.
Lug hardware is the part most often overlooked. Nut seat type, thread length and material should all match the wheel’s seat design and thickness. Inspect the nuts for wear at each tire rotation, and replace any that show damage, since a worn seat can loosen under load.
- Confirm the 8 on 180 stud count and spacing
- Check the lug seat type before buying nuts
- Measure the 124 bore against your hub
- Inspect nuts at each tire rotation
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD56020901850 |
| Model line | Vapor D560 |
| Wheel diameter | 20 inches |
| Wheel width | 9 inches |
| Bolt pattern | 8 on 180 |
| Center bore | 124 |
| Offset | 1 |
| Backspacing | 5 |
| Construction | Aluminum |
| Style | Split spoke |
| Finish | Matte black |
Vehicle fitment
FUEL Off-Road lists universal fit for this wheel and names no year, make or model. The 8 on 180 pattern is the key match to verify on your vehicle.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the 124 center bore against your hub, and use hub-centric rings if the hub bore is smaller.
What’s included
Check the 124 center bore against your hub. A wheel bore larger than the hub’s centering diameter usually needs hub-centric rings.
Not included: Tires are not part of the wheel.









