Overview
Part MHTD53620909857 is a chrome spoke wheel in the FUEL Off-Road Maverick line, built from aluminum with a 20 Inch diameter and a 9 Inch width. It has a 106 center bore, a 20 offset and a 5.8 backspacing.
Two bolt pattern entries are given, 6 on 5.5/6 on 135 and 6 on 135. Matching the hub’s lug count and spacing to one of them is the first step before the wheel is considered for any truck.
Key features
- Chrome finish
- Spoke style
- Center bore of 106
- Offset 20 and backspacing 5.8
- Two bolt pattern entries
Keeping spoke faces clean
Spoke faces collect brake dust in the crevices between the spokes, where it is harder to reach. Chrome plating holds up well to regular washing but can pit if brake dust and road salt sit on it for long periods. A soft brush and a neutral cleaner reach the detail areas without scratching the surface.
Chrome wheels can be damaged by impacts with curbs and rocks, so inspect the lip and spoke edges after rough trail use. Small chips in the plating can spread if left alone, so touch them up or have them checked before the wheel goes back into regular use.
- Brush the spoke crevices weekly
- Rinse off road salt promptly
- Inspect the lip after rough trails
- Address chips before they spread
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD53620909857 |
| Model line | Maverick |
| Wheel diameter | 20 Inches |
| Wheel width | 9 Inches |
| Bolt pattern | 6 on 5.5/6 on 135 |
| Bolt pattern (second entry) | 6 on 135 |
| Center bore | 106 |
| Offset | 20 |
| Backspacing | 5.8 |
| Style | Spoke |
| Finish | Chrome |
| Construction | Aluminum |
Vehicle fitment
No specific vehicle fit is attached to this wheel. Compare the 6 on 5.5/6 on 135 pattern and the 106 center bore with your truck before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test-fit one chrome wheel for clearance at the 20 offset before mounting a full set, and confirm which of the two listed bolt patterns matches your hub.
What’s included
Plan around tires, lug nuts and center caps, which need to be confirmed against your installation before starting.









