Overview
The FUEL Off-Road D525 Revolver in 17×9 inches is a black, machined aluminum wheel with part number MHTD52517905745. It carries 5 on 5 and 5 on 5.5 bolt patterns and is labeled universal fit, so no specific vehicle is named.
The wheel has an 87 center bore, a -12 offset and 4.5 backspacing. Those numbers guide how the wheel seats on the hub and how much space the tire needs inside the fender.
Key features
- 17-inch diameter and 9-inch width.
- Aluminum construction with a black finish and machining.
- Two bolt patterns: 5 on 5 and 5 on 5.5.
- 87 center bore.
- Offset of -12 and backspacing of 4.5.
- Universal fit wheel with no particular vehicle applied.
Negative offset and the fender
A negative offset pushes the wheel face outward, so more of the wheel sits out past the hub than with a positive-offset wheel. This can bring the tire closer to the outer fender edge and change how a lift or wider tire clears. Check the outer clearance on the vehicle before deciding the wheel works for an off-road build.
The 87 center bore and the 5 on 5 or 5 on 5.5 pattern set how the wheel seats on the hub. Because the two patterns differ, the hub must be measured and matched before any lug nut is tightened. Machined finishes can also show wear on the spoke edges over time, so inspect them after rough trail use for chips or cracks.
- Measure the hub pattern first
- Check outer fender clearance with the tire fitted
- Inspect machined edges after trail use
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD52517905745 |
| Style | Revolver |
| Diameter | 17 inches |
| Width | 9 inches |
| Bolt pattern | 5 on 5/5 on 5.5 |
| Center bore | 87 |
| Offset | -12 |
| Backspacing | 4.5 |
| Construction | Aluminum |
| Finish | Black with machining |
| Fitment | Universal fit |
Vehicle fitment
This wheel has no vehicle list. The 5 on 5 and 5 on 5.5 patterns, the 87 center bore and the -12 offset are the points to check against your hub, since universal fit covers no particular year or model.
A 5 on 5 hub and a 5 on 5.5 hub are different, so only one of the two patterns will match a given vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Sit the wheel on the hub and check the inner lip against the brake caliper at full steering lock before a tire is installed. The negative offset places the face outboard, which can change how the tire clears the outer fender edge.
What’s included
This item covers the wheel only. Lug hardware, center caps and tires are not included.
Not included: Tires and lug hardware are sourced separately.









