Overview
The FUEL Off-Road D755 Reaction wheel, 20×9 inches with part number MHTD75520901750, is an aluminum directional wheel with a black and milled finish that carries a red tint. Its one bolt pattern is 8 on 170, so eight-stud hubs are the target.
No vehicle is named for this wheel. The 125 center bore and offset of 1 are the measurements to compare with the hub. Offset is the distance from the mounting face to the centerline, and a value of 1 keeps the face close to center, which generally suits a standard fitment.
Key features
- Black and milled finish with a red tint
- Single 8 on 170 bolt pattern
- Directional style design
- 20-inch diameter and 9-inch width
- Center bore 125, offset 1, backspacing 5.04
Tint, finish and wear
A tinted finish sits on the surface of the wheel and does not alter the metal beneath. Over time, the tint and the black finish can wear where the tire bead and curb contact occur, and bare aluminum may show. Regular cleaning with mild soap keeps the finish even, and any chips should be touched up with a product made for wheels.
Fitment for this wheel comes down to the eight-stud pattern, the center bore and the offset, which all sit in the hub and suspension area rather than in the finish. Check brake caliper clearance with a test fit before mounting a tire, and confirm the wheel seats fully against the hub face.
- Wash with mild soap and water
- Avoid abrasive pads on the finish
- Inspect the wheel after any curb contact
- Check lug seats for uneven wear
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD75520901750 |
| Model | D755 Reaction |
| Diameter | 20 inches |
| Width | 9 inches |
| Bolt pattern | 8 on 170 |
| Offset | 1 |
| Center bore | 125 |
| Backspacing | 5.04 |
| Style | Directional |
| Finish | Black/Milled/Red |
| Construction | Aluminum |
| Fitment | Universal Fit |
Vehicle fitment
The wheel is universal fit, so no year, make or model is matched to it. Choose it by the bolt pattern, center bore and offset that agree with your hub.
The red tint is a finish detail only and does not change fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
With eight studs, start each nut by hand and seat them evenly before final torque. A test fit that confirms brake caliper clearance is worth doing before a tire is mounted.
What’s included
The wheel is the only item covered. Confirm whether lug nuts or center caps are part of your order before mounting.
Not included: tires, which are needed for a complete wheel and tire assembly.









