Overview
The FUEL Off-Road D753 Reaction wheel in 22×10 inches, part number MHTD75322009847, is an aluminum directional wheel with a black and milled finish. Two six-lug patterns are given, 6 on 135 and 6 on 5.5, with 6 on 135 also shown as a second pattern.
The wheel is Universal Fit, so no vehicle is named. Its offset of -18 is negative, which moves the wheel outward and widens the stance compared with a near-zero offset. The 106 center bore and 4.79 backspacing should be checked against the hub and the inner clearance before the wheel is ordered.
Key features
- Aluminum construction with a black and milled finish
- Directional style design
- Two six-lug bolt patterns listed: 6 on 135 and 6 on 5.5
- 22-inch diameter with a 10-inch width
- Negative offset of -18 and center bore of 106
Negative offset and stance
A negative offset places the mounting face behind the centerline, so the wheel sits farther out than a standard fitment. On a 10-inch wide wheel this shifts the tire toward the fender and can change how the suspension and steering parts clear the inside of the wheel. The effect is most visible at full steering lock and when the vehicle carries a load.
Check the outer clearance with the tire fitted and the suspension in its full range of travel, not only on a stand. Pay attention to the fender lip, the tie rod ends and the control arm ends. If the wheel rubs, fender trimming or wheel spacers may be considered, though spacers change the load on the hub bearings and need to be chosen with care.
- Measure fender lip to tire at full lock
- Look at tie rod ends and control arms
- Consider tire width and sidewall height together
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD75322009847 |
| Model | D753 Reaction |
| Diameter | 22 inches |
| Width | 10 inches |
| Bolt pattern | 6 on 135/6 on 5.5 |
| Bolt pattern 2 | 6 on 135 |
| Offset | -18 |
| Center bore | 106 |
| Backspacing | 4.79 |
| Style | Directional |
| Finish | Black/Milled |
| Construction | Aluminum |
| Fitment | Universal Fit |
Vehicle fitment
The wheel is universal fit and is not matched to one vehicle, so the choice depends on bolt pattern, center bore and offset.
A -18 offset on a 10-inch wide wheel can contact fenders or suspension on some vehicles, so check clearance. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test-fit the wheel with the brake caliper and suspension in place before mounting a tire. Because the offset is negative, check outer clearance at full steering lock.
What’s included
The wheel is the only item covered. Confirm whether lug nuts, center caps and valve stems are in your order before mounting.
Not included: tires, which are needed for use on a vehicle.









