Overview
The FUEL Off-Road D754 Reaction is a 20×10 aluminum directional wheel, part MHTD75420008247, in a red and milled finish. It has an 8 on 6.5 bolt pattern, a 125 center bore and a -18 offset.
Because no vehicle is named, the hub is the deciding factor. Compare the 8 on 6.5 pattern, the 125 center bore and the offset of -18 with the hub you plan to use. The 10-inch width and negative offset set the wheel further out than a standard fitment would.
Key features
- Red and milled finish on aluminum construction
- Directional style design
- Bolt pattern 8 on 6.5
- 20-inch diameter with a 10-inch width
- Center bore 125, offset -18, backspacing 4.79
Caring for red milled finish
Milled aluminum has machined areas that are left bare or lightly finished, and red accents can dull with brake dust and road grime. Wash the wheel with a pH-neutral cleaner and a soft brush. Avoid harsh acid cleaners on machined faces, since they can stain bare metal and make later cleaning harder.
Stud spacing and offset are the more important checks on a directional wheel. Because the spokes are angled, the wheel should be mounted with the correct side facing outward, so check the markings before fitting. A negative offset moves the wheel outward, so inspect the fender lip and outer tie rod ends after the first drive.
- Clean brake dust off the spokes regularly
- Inspect lug seats for pitting or wear
- Re-torque lug nuts after the first short drive
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD75420008247 |
| Model | D754 Reaction |
| Diameter | 20 inches |
| Width | 10 inches |
| Bolt pattern | 8 on 6.5 |
| Offset | -18 |
| Center bore | 125 |
| Backspacing | 4.79 |
| Style | Directional |
| Finish | Red/Milled |
| Construction | Aluminum |
| Fitment | Universal Fit |
Vehicle fitment
The wheel is universal fit, so it is not matched to a specific make, model or year. The hub decides the fit.
The 8 on 6.5 pattern and the -18 offset must agree with your hub before you order. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the eight studs and their spacing match the 8 on 6.5 pattern before fitting. Verify brake and suspension clearance with a test fit, since the negative offset moves the wheel outward.
What’s included
The wheel is the only item covered. Lug nuts and center caps should be checked against your installation before mounting.
Not included: tires, which are needed to complete the wheel for use.









