Overview
The FUEL Off-Road Clash 6 D760 22×12 with an 8 on 180 bolt pattern is part number MHTD76022201847, a gloss black aluminum split spoke wheel. Its 8 on 180 bolt pattern and center bore 124 are the hub figures to match before anything else.
FUEL Off-Road describes its broader range as offered in many bolt pattern and offset combinations, so the bolt pattern and center bore carry the most weight in a fit check. This model also uses offset -44 and backspacing 8.23 across its 12-inch width.
Key features
- 22 inch by 12 inch split spoke wheel.
- 8 on 180 bolt pattern with center bore 124.
- Offset -44 and backspacing 8.23.
- Gloss black finish.
- Aluminum construction.
Hub fit and wheel care
Off-road wheels take repeated impacts from rocks, ruts and trail debris, so the wheel face and spokes deserve regular inspection. After a day of rough trail use, look for bent edges, cracked paint near the spoke roots and ridges around the bead. Small chips in the gloss black finish can be touched up before corrosion starts under the surface.
Wheel fit depends on more than the bolt pattern. Hub face contact, the center bore and the offset all decide whether the wheel seats flat and clears the brake caliper and suspension. A wheel that sits even slightly off-center can send vibration into the steering, so test-fit before the first drive and recheck lug torque after the first few trail runs.
- Clean the mounting face and hub before every install
- Use lug nuts seated for the wheel’s stud type
- Recheck torque after the first few trail runs
- Inspect the bead seat for dents whenever a tire is removed
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD76022201847 |
| Model | Clash 6 D760 |
| Wheel diameter | 22 Inches |
| Wheel width | 12 Inches |
| Bolt pattern | 8 on 180 |
| Center bore | 124 |
| Offset | -44 |
| Backspacing | 8.23 |
| Style | Split Spoke |
| Finish | Gloss Black |
| Construction | Aluminum |
Vehicle fitment
The only fitment label is Universal Fit, so no truck or SUV is confirmed. An 8 on 180 pattern is a specific hub match, so compare it with the hub of the vehicle you have in mind before choosing this wheel.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Center bore 124 should match the hub so the wheel centers properly, since a poor fit can cause vibration. Confirm the bolt pattern and studs before mounting.
What’s included
The product describes one wheel, and no tire or hardware is named.
Not included: a tire, plus any studs or lug nuts needed for an 8 on 180 hub.











