Overview
The D721 Ignite 20×10 is a 20-inch aluminum split spoke wheel with an 8 on 180 bolt pattern, part number MHTD72120001847, in a polished finish.
The wheel is 10 inches wide, with an offset of -19, a center bore of 124 and a backspacing of 4.75. The Ignite series is the D721 line, and no vehicles are named for fitment.
Key features
- Ignite series split spoke design
- Polished finish
- 20-inch diameter and 10-inch width
- 8 on 180 bolt pattern
- 124 center bore with offset -19
Polished finish care
Polished aluminum shows water spots, brake dust and scratches more quickly than painted finishes. Clean with a mild, pH neutral wheel cleaner and a soft brush, then dry the face to avoid spotting. Acid based cleaners and abrasive pads can dull the surface and should be avoided. Brake dust that bakes on should be removed soon after driving, since it can etch the finish.
Because the spokes of a split spoke wheel are open, brake dust and road grime build up in visible areas. Pay attention to the inner barrel and the back of the spokes. A -19 offset places the wheel farther out, so check that brake calipers and suspension parts have clearance before tires are mounted. Wheel service is a good time to inspect the lug studs and check for corrosion on the hub face.
- Use a pH neutral cleaner
- Avoid abrasive pads on polished faces
- Remove brake dust soon after driving
- Inspect studs during tire rotations
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD72120001847 |
| Series | D721 Ignite |
| Diameter | 20 inches |
| Width | 10 inches |
| Bolt pattern | 8 on 180 |
| Center bore | 124 |
| Offset | -19 |
| Backspacing | 4.75 |
| Style | Split Spoke |
| Finish | Polished |
| Construction | Aluminum |
Vehicle fitment
A specific hub must match the 8 on 180 pattern and 124 center bore before this wheel can be mounted. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test fit the 8 on 180 pattern and 124 center bore on the hub first. The -19 offset changes clearance to brakes and suspension, so check those before final torque.
What’s included
One Ignite wheel is described.
Not included: Tire and lug hardware will need separate sourcing.











