Overview
The FUEL Off-Road Blitz D675 20×8.25 in dually style carries part number MHTD675208292 and an 8 on 200 bolt pattern. It is an aluminum wheel, 20 inches in diameter and 8.25 inches wide, finished in Black.
Confirm hub compatibility, including the center bore, before mounting. Measure the 8 on 200 pattern and 105 offset against your hub as well, since the 8.9 backspacing also affects clearance.
Key features
- 20 inch diameter and 8.25 inch width
- 8 on 200 bolt pattern
- 105 offset
- 8.9 backspacing
- Dually style
- Black aluminum finish
Dually wheels on the road
Dually wheels are used in pairs on the rear axle of some heavy trucks, and each side of the axle carries two tires for added width and load support. That arrangement changes the way the wheels sit, since the inner wheel must clear the outer tire and the axle housing. Mounting and spacing are different from a single-wheel setup.
Tire pressure, tread wear and balance matter more on dual setups because a problem on one tire affects its partner. Check the pressure on both tires regularly, and rotate or replace them as a pair when wear is uneven. Balance each wheel carefully to avoid vibration at highway speeds.
Dually setups also change how a truck handles in wind and during braking, and they add weight. Inspect the valve stems, lug nuts and wheel faces after each trip. Keeping the inner and outer wheel surfaces clean makes it easier to spot early cracks.
- Check tire pressure on both tires in each pair
- Balance each wheel to avoid highway vibration
- Inspect the inner and outer wheel faces regularly
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD675208292 |
| Model code | D675208292 |
| Diameter | 20 inches |
| Width | 8.25 inches |
| Bolt pattern | 8 on 200 |
| Offset | 105 |
| Backspacing | 8.9 |
| Style | Dually |
| Construction | Aluminum |
| Finish | Black |
| Fitment | Universal Fit |
Vehicle fitment
No make, model or year is named. Universal Fit is the only fitment statement, which leaves the hub and clearance checks to you.
Confirm the 8 on 200 bolt pattern and 105 offset against your hub, since no center bore is given. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because no center bore is given, check hub compatibility with the manufacturer before mounting. Confirm the 8.9 backspacing against brake and suspension clearance.
What’s included
Confirm hub compatibility before mounting, including the center bore. Check the 8.9 backspacing against brake and suspension clearance on your vehicle.
Not included: Tires and lug hardware.











