Overview
The FUEL Off-Road Blitz D674 16×8 is an aluminum split spoke wheel with a 5 on 5.5 bolt pattern, part number MHTD67416808545 (model code D67416808545). It measures 16 inches in diameter and 8 inches wide, with a Matte Black finish (Black/DarkTint).
FUEL Off-Road says its wheels come in many bolt pattern and offset combinations. This Blitz D674 carries a Universal Fit designation, so no vehicle is named; the 108 center bore, 1 offset and 4.6 backspacing are the figures to check against your hub.
Key features
- Aluminum construction
- Split spoke design
- 16 inch diameter and 8 inch width
- 5 on 5.5 bolt pattern
- 108 center bore and 1 offset
- Black/DarkTint finish with a matte look
Choosing the right setup
Choosing a wheel starts with the hub. The bolt pattern has to match exactly, and the center bore should seat the wheel on the hub so the lug nuts carry the load rather than the studs. When the bore is larger than the hub, hub-centric rings are a common addition, and they should fill the gap completely.
Offset and backspacing decide how the wheel sits in the wheel well. A wheel set too far outward can rub fenders or strike suspension parts at full steering lock, while one set too far inward can crowd brake calipers. Measure clearance with the tire you plan to run, because tire width changes the result.
Spoke wheels collect dirt and brake dust between the spokes, so cleaning those gaps is part of routine upkeep. Re-check lug nut torque after the first few drives on new wheels, and inspect the spokes for cracks or bends after rough trail use.
- Hub-centric rings when the bore is larger than the hub
- Brake caliper clearance check before mounting
- Tire width matched to the 8 inch wheel
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD67416808545 |
| Model code | D67416808545 |
| Diameter | 16 inches |
| Width | 8 inches |
| Bolt pattern | 5 on 5.5 |
| Offset | 1 |
| Center bore | 108 |
| Backspacing | 4.6 |
| Style | Split Spoke |
| Construction | Aluminum |
| Finish | Black/DarkTint |
| Fitment | Universal Fit |
Vehicle fitment
No vehicle is named for this wheel. The only fitment entry is Universal Fit, so the bolt pattern and hub size decide whether it suits a given model.
Compare the 5 on 5.5 bolt pattern and 108 center bore with your hub, and check the 4.6 backspacing against brake and suspension clearance. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the 108 center bore against your hub before mounting, and confirm the 4.6 backspacing leaves enough clearance for your brake calipers. Use the torque specification from your vehicle’s service information.
What’s included
This item covers the wheel itself. Confirm lug nuts and center caps for your installation before ordering.
Not included: Tires, and lug hardware for mounting.











