Overview
The FUEL Off-Road Hardline D646 is a 20 inch by 10 inch aluminum spoke wheel with an 8 on 170 bolt pattern, an offset of -18 and a center bore of 125. It is finished in black and blue and carries part number MHTD64620001747.
A negative offset of -18 pushes the mounting face outward, which affects how the wheel sits against the fender and suspension components. Check clearance on the specific vehicle before fitting tires.
Key features
- 20 inch diameter and 10 inch width in a spoke design
- 8 on 170 bolt pattern
- Offset of -18 with backspacing of 4.79
- Center bore of 125
- Black and blue finish on aluminum
Things to check
A 20-inch wheel with a 10-inch width leaves less tire sidewall to absorb impacts, so trail damage on the rim is more likely than with a taller tire. Negative offset pushes the mounting face outward, which can add stance but also increases the load on wheel bearings and the outer edge of the tire’s contact with fenders. Choosing a tire with a load rating suited to the vehicle keeps the setup safer on rough ground.
Steering geometry needs a check when a wheel with a large diameter is fitted. A full-lock turn can bring the tire against a tie rod, a control arm or the inner fender, especially after a lift. Inspect the wheel face and lip after each trail outing, and look for bent edges, cracked spokes or bead-seat damage. Early repair is simpler than replacing a wheel or tire that failed on the trail.
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Model | Hardline D646 |
| Part number | MHTD64620001747 |
| Wheel diameter | 20 inches |
| Wheel width | 10 inches |
| Bolt pattern | 8 on 170 |
| Offset | -18 |
| Center bore | 125 |
| Backspacing | 4.79 |
| Style | Spoke |
| Finish | Black/Blue |
| Construction | Aluminum |
Vehicle fitment
No make, model or year is tied to this wheel. It is a universal fit design, so the bolt pattern, center bore and offset must match the vehicle.
Confirm an 8 on 170 hub, a 125 center bore and enough clearance for a -18 offset on your own vehicle. The brand’s published specifications are the place to check those numbers.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An 8 on 170 pattern is a specific lug layout, so verify the hub before any other step. Because the offset is negative, test fit with the tire mounted and turn the steering to full lock on each side.
What’s included
One wheel is covered here. Before starting the install, compare the included items with your own parts list, and source any tire or lug hardware still needed.
Not included: Tires are not included with the wheel.











