Overview
The FUEL Off-Road Blitz D673 Wheel, 20×8.25, part number MHTD67320828D, is a split spoke aluminum wheel in Black/Milled finish. It uses an 8 on 6.5 bolt pattern with a 122 center bore, 105 offset and 8.9 backspacing.
The Universal Fit label names no vehicles, so the 122 center bore and 8 on 6.5 pattern are the checks that matter before mounting.
Key features
- Split spoke styling in Black/Milled finish
- Center bore of 122
- Offset 105 with 8.9 backspacing
- 8 on 6.5 bolt pattern on aluminum construction
Center bore and hub-centric fit
A center bore that matches the hub lets the wheel center itself, so the lug studs carry only clamping load instead of the full weight of the vehicle. When the bore is larger than the hub, a hub-centric ring is the usual fix. Rings should be fitted to the correct diameter and seated fully before the wheel goes on.
Vibration at highway speed is often traced to a wheel that is not centered, a missing ring or a bent rotor. Check run-out at the rotor and inspect the bore edge for burrs before mounting. Clean the hub face and remove any rust so the wheel sits flat against it.
- Fit rings to the correct diameter
- Check for burrs on the bore edge
- Clean rust from the hub face
- Look for vibration after a short test drive
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD67320828D |
| Wheel diameter | 20 Inches |
| Wheel width | 8.25 Inches |
| Center bore | 122 |
| Offset | 105 |
| Backspacing | 8.9 |
| Bolt pattern | 8 on 6.5 |
| Style | Split Spoke |
| Finish | Black/Milled |
| Construction | Aluminum |
| Fitment label | Universal Fit |
Vehicle fitment
No vehicle is tied to this wheel. Hub compatibility depends on the bolt pattern, center bore and offset rather than a model year.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm that the 122 center bore suits your hub before mounting, since the bore must match the hub for the wheel to seat correctly.
What’s included
The Black/Milled wheel described above.
Not included: Tires need to be sourced separately and sized for the 20 inch diameter and 8.25 inch width.











