Overview
The FUEL Off-Road D754 Reaction is a 20×9 inch aluminum directional wheel, part number MHTD75420907050, in red and milled finish. It covers two five-lug patterns, 5 on 5.5 and 5 on 150.
It is a universal-fit wheel. A 110 center bore and an offset of 1 keep the mounting face close to the centerline. Backspacing of 5.04 sets the space from the mounting face to the inner barrel edge, which matters for brake and suspension clearance.
Key features
- Two five-lug patterns listed: 5 on 5.5 and 5 on 150
- Red and milled finish on aluminum construction
- Directional style design
- 20-inch diameter with a 9-inch width
- Center bore 110, offset 1, backspacing 5.04
Five-lug hubs and centering
Five-lug hubs often rely on the center bore to locate the wheel, while the studs carry the clamping load. When the bore is larger than the hub, the wheel can sit slightly off center, which causes vibration that is easy to mistake for tire imbalance. Before buying, measure the hub diameter and compare it with the bore, then decide whether a centering solution is needed.
Choosing between the two five-lug patterns comes down to the hub you already have. Mixing patterns with adapters adds stress and another point of failure, so match the wheel to the hub directly. Inspect the studs for stretched threads or rust, and replace any that look damaged before fitting a new wheel. Tighten in a star pattern and retighten after a short drive.
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD75420907050 |
| Model | D754 Reaction |
| Diameter | 20 inches |
| Width | 9 inches |
| Bolt pattern | 5 on 5.5/5 on 150 |
| Bolt pattern 2 | 5 on 150 |
| Offset | 1 |
| Center bore | 110 |
| Backspacing | 5.04 |
| Style | Directional |
| Finish | Red/Milled |
| Construction | Aluminum |
| Fitment | Universal Fit |
Vehicle fitment
The wheel is a universal-fit design and is not tied to a specific vehicle. Pick the five-lug pattern your hub uses, either 5 on 5.5 or 5 on 150, and confirm the 110 center bore. Confirm your vehicle’s year, model and trim before ordering.
Pick the pattern your hub uses, either 5 on 5.5 or 5 on 150, and confirm the 110 center bore. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Five studs are easy to misalign, so start each nut by hand and confirm the wheel sits flat against the hub. Check brake caliper clearance behind the spokes during a test fit.
What’s included
Tires are not included and must be mounted before the wheel is used.
Not included: tires, which must be mounted before the wheel is used.









