Overview
FUEL Off-Road’s Ammo D700 17×9 wheel, part MHTD70017908450, is a matte black aluminum split spoke with a 6 on 5.5 bolt pattern and an offset of 1. It is intended for six-lug trucks and SUVs that want a bold, rugged look. The brand describes fitment as universal, which leaves the bolt pattern and offset for the owner to match.
The wheel is 17 Inches in diameter and 9 Inches wide, with a center bore of 106 and backspacing of 5.04. An offset of 1 combined with 5.04 backspacing sets where the wheel sits in the fender, so check tire and suspension clearance before mounting.
Key features
- Matte black split spoke styling
- Aluminum construction
- 6 on 5.5 bolt pattern
- Offset of 1 with 5.04 backspacing
- 106 center bore
- 17 Inches by 9 Inches size
Choosing an offset
Offset decides where the wheel face sits relative to the hub, and that position drives clearance at brake calipers, fenders and steering parts. A small positive offset like this one keeps the wheel closer to the hub than a deep negative offset would, so the barrel may sit nearer to suspension components. Compare the offset with the lift height and tire width you plan to run.
Backspacing works alongside offset. Two wheels with the same offset can sit differently if their backspacing differs, so look at both figures together. Tire width is the other half of the picture: a wider tire fills more space behind the wheel, which can reduce inner clearance. Test-fit with the tire you plan to use when possible.
Hub-centric rings and wheel spacers are common add-ons. Rings center the wheel on the hub; spacers push the wheel outward and change offset. Spacers add stress to studs and should be used only with the correct length studs. Re-check lug torque after the first few drives, and inspect the wheel face after trail use for cracks or bends.
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Model | Ammo D700 |
| Part number | MHTD70017908450 |
| Wheel diameter | 17 Inches |
| Wheel width | 9 Inches |
| Bolt pattern | 6 on 5.5 |
| Offset | 1 |
| Center bore | 106 |
| Backspacing | 5.04 |
| Style | Split Spoke |
| Finish | Matte Black |
| Construction | Aluminum |
Vehicle fitment
No year, make, model or trim is named for this wheel, so the fit is universal. Six-lug hubs with 5.5 spacing are the only hubs this pattern matches, so count the lugs and measure the spacing first.
Confirm your vehicle’s year, model and trim before ordering. Measure the hub before assuming the 106 bore is correct for your application.
Installation notes
Test-fit the wheel against the hub and confirm the 106 center bore matches. Check brake caliper and fender clearance with the offset of 1 and backspacing of 5.04 before driving, then recheck lug tightness after the first few miles.
What’s included
This entry covers the wheel alone, in matte black with part number MHTD70017908450.
Not included: Check the package contents against your installation before starting, and source tires, lug nuts and center caps separately if needed.











