Overview
The Bushwacker 10912-07 is a cut-out style front and rear fender flare set for the Jeep Cherokee XJ, sold with stainless steel hardware. Bushwacker designs each set for extreme off-road use to maximize wheel travel and maintain tire coverage, and this set provides 5 in. of coverage against debris. The Cherokee XJ fit is shown on the Fitment tab for 1984 to 2001 models.
Cut-out flares require cutting body sheet metal to reach full articulation. The custom approach gives a smoother look, more strength and easier bolt-on installation. The OEM matte black finish is UV protected and can be left as-is or painted to match the body, and the Dura-Flex 2000 TPO is made to flex in severe conditions.
Key features
- Provides 5 in. of tire coverage against debris
- Front and rear flares in one set
- Exclusive bold pocket design and style
- Stainless steel hardware for a bolt-on installation
- OEM matte black finish that can be painted
- Dura-Flex 2000 TPO, UV protected
Trail use and clearance
Fender flares cover the tire opening so mud, rock chips and spray stay off the body while the suspension cycles. On a Cherokee XJ running larger tires or a lift, the flare edge decides how much tire shows and how much debris reaches the doors. Cut-out designs open more of the wheel well, which suits articulation, but the body opening has to be checked before any cuts are made.
Before cutting, mark the sheet metal from the template, check brake lines, fuel lines and wiring near the wheel opening, and remove the liners. Smooth the cut edges and treat bare metal before the flares go on. Paintable flares can be finished to match the body, but paint should go on a clean, dry surface and cure fully before the flares are bolted in.
- Check suspension and steering clearance after installation
- Re-check the stainless fasteners after the first trail outings
- Inspect flare edges for cracks after hard off-road use
- Wash mud from the underside to protect the finish
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 10912-07 |
| UPC | 90689106780 |
| Vehicle | Jeep Cherokee XJ |
| Position | Front and rear |
| Sold as | Set |
| Tire coverage | 5 in. |
| Style | Cut-out, pocket design |
| Finish | OEM matte black, smooth, paintable |
| Material | Dura-Flex 2000 TPO, UV protected |
| Hardware | Stainless steel |
| Warranty | Limited Lifetime |
| Made in | USA |
Vehicle fitment
This set fits the Jeep Cherokee XJ, 1984 to 2001. It is not for the Comanche or the CJ Series, which are different models, and the Grand Cherokee and Liberty use different bodies.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the design is cut-out style, installation involves cutting body sheet metal. Bushwacker refers to the installation guide for the specific model, so read it before making any cuts.
What’s included
A front and rear set of cut-out style flares with stainless steel hardware.











