Overview
The Fox Racing Shox 983-06-106 is a Fox 2.5 Performance Series coilover reservoir shock with a DSC adjuster, part number 983-06-106. Fox offers its shocks in many features and sizes, and they can be valved to suit specific driving needs, letting a builder match the shock to a project. It is a universal fit shock, so confirm fit for your vehicle’s year, model and trim before ordering.
Multiple mounting options are offered across this shock range, and the shocks are built for high performance use. A coilover shock carries the coil spring around the damper body, and the reservoir adds a separate chamber for extra fluid and gas volume. Measure your existing shock’s length and stroke and compare them with this unit before ordering.
Key features
- Coilover reservoir design
- DSC adjuster
- Gas charged
- Multiple mounting options
- Part of the 2.5 Performance Series
Reservoir shock maintenance
Reservoir shocks handle more heat than single tube units because the separate chamber gives the fluid and gas room to move. Keeping that system healthy starts with clean shafts. Dirt and grit worn into the seal will draw oil out and let debris into the damper, so wipe the shaft after muddy trips and look for a dry, clean rod each time you check the vehicle.
The hose between the body and reservoir deserves regular attention. Rubbing against a frame rail or a tire can wear through it, and a loose clamp lets it move around over rough ground. After a long run on rocky terrain, check the routing, the fasteners and the eyelet bushings. Replacing a worn bushing early is usually cheaper than replacing the whole shock after it fails.
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 983-06-106 |
| UPC | 7000007186401 |
| Series | 2.5 Performance Series |
| Body type | Coilover reservoir |
| Adjuster | DSC |
| Hydraulic / gas charged | Gas charged |
Vehicle fitment
It is a universal fit shock with no specific vehicle named. Length, stroke and mounting style all have to match your vehicle, so confirm those measurements for your application.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan the reservoir and hose routing with clearance from the spring, tire and steering components before final tightening.
What’s included
Confirm whether mounting hardware, a spring or a bump stop is needed before starting the installation.






