Overview
The Fox Racing Shox 2.0 Performance Series shock, part number 985-24-060, is a bolt-on hydraulic gas-charged shock absorber with a black aluminum body and a 2.0 in body diameter. It uses OEM direct replacement mounting. Confirm the application for your vehicle before buying.
The shock uses a metal-impacted aluminum body that Fox says dissipates heat faster than conventional steel, helping reduce heat build-up during hard use. Inside, an internal floating piston separates the shock oil from a high-pressure nitrogen gas chamber, which Fox describes as predictable ride quality on rough roads. Fox positions the 2.0 Performance Series for race-level performance in a bolt-on package.
Key features
- Metal-impacted aluminum shock body that dissipates heat faster than conventional steel.
- Internal Floating Piston (IFP) separating shock oil from a high-pressure nitrogen gas chamber
- Internal reservoir design
- OEM direct replacement mounting for a bolt-on installation
- Hydraulic, gas-charged damping
Mounts and measurements
Matching a replacement damper starts with the mount pattern and the travel the suspension needs. A replacement shock with an internal reservoir can give the body more room to shed heat during long grades, which suits heavy towing or steady trail use. Lengths should be compared with the shock being removed, since even a small difference changes ride height and clearance.
Look at the bushings and mounting ends during the swap. Worn rubber can bind the shock, while a bent eyelet can cause uneven loading and early wear. After installing, cycle the suspension by hand through full travel to confirm clearance from the tires, brake lines and frame. Recheck mounting bolts after the first few drives.
- Measure the removed shock before ordering
- Inspect bushings and eyelets during removal
- Confirm clearance at full compression
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-24-060 |
| UPC | 700006894651 |
| Series | 2.0 Performance Series |
| Type | Hydraulic / Gas Charged |
| Finish | Black and aluminum |
| Body diameter | 2.0 in |
| Shaft diameter | 5/8 in |
| Travel | Application specific |
| Extended length | Application specific |
| Collapsed length | Application specific |
| Reservoir | Internal |
| Mounting | OEM direct replacement |
Vehicle fitment
Fitment depends on your vehicle, and travel, extended length and collapsed length vary by application. Confirm your vehicle’s year, model and trim before ordering, and check mounting before installing.
Before installing, check the mounting and lengths against your vehicle’s current shock.
Installation notes
This is a bolt-on package with OEM direct replacement mounting. Because lengths vary by application, measure the existing shock’s extended and collapsed lengths before installing.
What’s included
Some components are sold separately, so confirm which parts you need before installing.
Not included: Items marked Sold Separately are not part of this shock.







