Overview
The Fox Racing Shox 2.0 Performance Series IFP shock, part 985-24-019, is a single gas-charged hydraulic shock with an internal reservoir for the 4WD front position. Its extended length is 26.75 inches and its collapsed length is 16.65 inches, giving 10.1 inches of travel.
It is a direct replacement bolt-on unit, and the design was developed for suspension travel on and off road. No specific vehicle is attached to this part.
Key features
- Internal reservoir design
- Gas-charged hydraulic operation
- IFP (internal floating piston) design
- 10.1 inch travel in the 4WD front position
Gas-charged shock basics
Gas-charged shocks hold a nitrogen charge that keeps the oil under pressure, which helps limit foaming during fast movement. That pressure is why these shocks should be handled with care. Never heat, puncture or open a gas-charged body, and plan removal with the vehicle properly supported.
Internal reservoirs give the oil and gas more room to separate, which can help a shock perform consistently over longer runs. When replacing, measure the old shock’s collapsed and extended lengths and compare them with the new unit. Keep the mounts clean and inspect the bushings, since loose or cracked mounts can knock and reduce control.
- Do not heat or puncture a gas-charged body
- Support the vehicle before removing a shock
- Measure old shock lengths before ordering
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-24-019 |
| UPC | 70000617867 |
| Series | Fox 2.0 Performance Series, smooth body |
| Design | Internal reservoir, single shock |
| Operation | Hydraulic, gas charged |
| Extended length | 26.75 inch |
| Collapsed length | 16.65 inch |
| Travel | 10.1 inch |
| Position | 4WD front |
Vehicle fitment
No year, make or model is attached to this shock. It is a direct-fit replacement for a 4WD front position, so the vehicles it covers are unknown.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gas-charged shocks are under pressure, so have a qualified installer handle removal and fitting.
What’s included
The package holds one shock. Mounting hardware and bushings are unknown, so review the contents before fitting.








