Overview
The Fox Racing Shox 980-24-646 is a front 2.0 Performance Series IFP shock with an internal reservoir and a black and aluminum finish. It is built for the 4WD front position and works as an OEM direct replacement.
The body is 2.0 inch in diameter and the shaft is 5/8 inch. Travel, extended length and collapsed length vary by application, so measure the shock being replaced before ordering.
Key features
- Black and aluminum finish
- 2.0 inch body diameter
- 5/8 inch shaft diameter
- Internal reservoir
- OEM direct replacement mounting for the front 4WD position
- Gas-charged hydraulic damping
Choosing a replacement shock
A replacement IFP shock works as part of the damping system at each corner, so mounting position matters as much as damping. For a front 4WD position, steering and axle geometry shape how the shock is loaded, which is why matching the original mounting points and length comes first. The internal floating piston keeps the oil and gas charge apart, helping damping stay consistent when the shock runs hot on long descents.
Before buying, measure the installed length of the old shock with the suspension at rest and note the mounting eye style. Worn bushings, leaking seals or a shock that feels soft on rebound are signs the old unit needs replacing. Reusing upper and lower hardware is fine if it is in good shape, but inspect it for wear and corrosion first.
- Measure installed length before ordering
- Inspect mounting bushings and hardware
- Check the shaft seal for oil seepage
- Replace front units in matched sets
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-24-646 |
| UPC | 70000618082 |
| Product line | 2.0 Performance Series |
| Type | IFP shock |
| Finish | Black and aluminum |
| Body diameter | 2.0 inch |
| Shaft diameter | 5/8 inch |
| Reservoir | Internal |
| Travel | Application specific |
| Extended length | Application specific |
| Collapsed length | Application specific |
| Mounting | OEM direct replacement |
| Position | Front |
| Drivetrain | 4WD |
| Damping type | Hydraulic / gas charged |
Vehicle fitment
No make, model or years are named for this shock. The front 4WD position is the only application covered, so compare length and travel with the front shock you are replacing.
Length and travel vary by application, so match them to your vehicle. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber.
Not included: This shock is sold separately, so any additional unit is a separate purchase.








