Overview
The Fox Racing Shox 985-24-082 is a Fox 2.0 Performance Series smooth body IFP shock absorber with a gas-charged design.
Fox says its direct replacement shocks are a simple bolt-on shock, with each application tested by Fox engineers to maximize suspension travel and performance on and off the road. Direct replacement shocks are available in hundreds of applications, from stock to lifted, as well as aftermarket kit replacements.
Confirm the application for your vehicle before ordering.
Key features
- Fox 2.0 Performance Series smooth body IFP design
- Gas charged
- Direct replacement bolt-on shock
- Fox says each application is tested by its engineers to maximize suspension travel
Gas charged shocks on the trail
A gas charged shock uses pressurized gas to limit foaming in the oil, which helps damping stay consistent during long descents and repeated hits on rough ground. A smooth body design keeps the outer tube clean and simple to fit, and the internal floating piston separates the oil from the gas so the damping stays steady.
Shock condition is worth checking before fitting any new unit. Leaking oil, dented shafts and worn bushings reduce damping and can make a vehicle feel loose or bouncy. Shocks are normally replaced in pairs on the same axle so that both sides respond the same way.
- Check the bushings and mounts for wear
- Look for oil seepage on the shaft and body
- Replace shocks in pairs on the same axle
- Re-check mounting torque after the first drive
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-24-082 |
| UPC | 70000706590 |
| Product type | Shock absorber |
| Series | Fox 2.0 Performance Series |
| Body | Smooth body IFP |
| Hydraulic / gas charged | Gas charged |
| Fit type | Universal fit |
| Manufacturer SKU | FOX985-24-082 |
Vehicle fitment
No specific vehicle is named for this part number. Shock length and mounting style depend on the application, so confirm your vehicle’s year, model and trim before ordering.
Shock length and mounting style are vehicle specific. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Professional installation is recommended, since suspension components affect steering, braking and handling. Support the vehicle on jack stands rather than a jack alone, torque every fastener to its specified value, and re-check the torque after the first miles of driving. Have the alignment checked after any suspension work, and check local regulations on vehicle height and equipment.









