Overview
The Fox Racing Shox 983-02-054 is a 2.0 Performance Series coil-over IFP shock, a gas-charged damper meant to be paired with a coil spring. In an IFP design the shock oil is separated from the nitrogen by an internal floating piston, so the oil and gas stay in their own chambers during long runs over rough ground.
The body is black anodized 6061-T6 billet aluminum, and the shaft is 5/8-inch hard chrome. The piston is race-developed with a high-flow design, and the seals use a redundant pack. It is a direct fit shock, but no vehicles are named, so check the mount and clearance on your own vehicle.
Coil-over shocks are chosen when a builder wants to adjust the spring and the damper independently. The 983-02-054 suits that kind of setup, provided the mounts and spring are matched to the vehicle.
Key features
- Black anodized 6061-T6 billet aluminum components
- 5/8-inch hard chrome shaft
- Race-developed high-flow piston design
- Redundant sealing pack system
- Internal reservoir keeps shock oil apart from the high-pressure nitrogen
Setup and spring choice
A coilover shock works with a separate spring, so the spring rate and the damper must be chosen as a pair. A spring that is too firm or too soft changes ride height and how the shock behaves near the end of its travel. Consider the vehicle’s weight and intended use, and set preload only once the shock is secured.
Floating piston designs keep oil and gas apart, which helps the damper hold steady over long runs on rough ground. Because a coilover can clear at ride height and still rub at full compression, check the spring seats and body clearance through the full range of travel.
- Check spring seats for wear
- Confirm spring and shock lengths together
- Use proper spring compressors during service
- Recheck preload after the first drive
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 983-02-054 |
| UPC | 70000618119 |
| Series | Performance Series 2.0 Coil-Over IFP |
| Body material | Black anodized 6061-T6 billet aluminum |
| Shaft | 5/8-inch hard chrome |
| Shock type | Hydraulic, gas charged |
| Mounting | Direct fit, multiple mounting options |
Vehicle fitment
No vehicle is named for this shock, so direct fit is not tied to a specific make, model or year. Treat direct fit as a starting point and check the mount, spring seat and clearance on your own vehicle.
Smooth body, air and remote reservoir Fox shocks use different part numbers and are not covered here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the body is gas charged, the nitrogen charge is under high pressure. Take any service or disposal to a qualified shop, and set spring preload and mounts only after the shock is secured.
What’s included
The shock is a coil-over with the construction and features described above. Check the box for spring and accessory contents before installing.
Not included: Confirm whether a coil spring and mounting hardware are included before installing.







