Overview
The Fox Racing Shox 2.0 Series Air Shock, part number 980-02-020, is a gas-charged smooth body shock with a black and zinc finish. It has a 2.0″ body diameter, 14.0″ of travel and a 1.250″ shaft diameter.
The shock comes in a range of sizes and can be valved for specific driving needs. It carries a Universal Fit label, so compare its extended and collapsed lengths with your current suspension before installing.
Key features
- Black and zinc finish
- 2.0″ body diameter
- 14.0″ travel
- 1.250″ shaft diameter
- 1/2″ bolt or heim mounting
- Hydraulic, gas-charged smooth body design
Choosing a gas shock setup
A gas-charged smooth body shock controls the suspension by turning movement into heat in the damping oil, and it relies on the gas charge to keep that oil from foaming during repeated compressions. On a vehicle that sees rough trails or fast washboard, the shock works hard, so a solid mount and clean fasteners matter as much as the damping itself. Before choosing a length or valving for a build, check how far the suspension extends and compresses, because the shock must stay inside its travel at both ends.
Replacing a shock is often easier when the other shocks on the same axle are replaced at the same time. Matching valving and length across a pair keeps the vehicle from pulling to one side or leaning on corners. Parts that wear alongside shocks include bushings, bolts and heims, so inspect them while the suspension is open.
- Check clearance at full compression and full extension
- Inspect bushings and heims for play
- Replace shocks in pairs on the same axle
- Clean the shaft before fitting seals
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-02-020 |
| UPC | 70000375594 |
| Series | 2.0 Series Air Shock |
| Finish | Black and zinc |
| Body diameter | 2.0″ |
| Travel | 14.0″ |
| Shaft diameter | 1.250″ |
| Extended length | 35.09″ |
| Collapsed length | 21.09″ |
| Mounting | 1/2″ bolt / heim |
Vehicle fitment
This shock is sold as Universal Fit, which does not tie it to one model. Its extended and collapsed lengths decide whether it suits a given vehicle.
Because this is a shock sized for a vehicle, check the 35.09″ extended and 21.09″ collapsed lengths against your suspension. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The mounts are 1/2″ bolt or heim style, so confirm your brackets and fasteners accept that size before fitting. Use the collapsed and extended measurements to check clearance across the full range of suspension travel.
What’s included
No accessories come with the shock, which ships on its own.
Not included: Check the package for mounting hardware, bolts or heims before starting the install, and match them to your brackets.







