Overview
The Fox Racing Shox 980-24-644 is a Fox 2.0 Performance Series IFP shock with a black and aluminum finish, a 2.0 inch body diameter and an internal reservoir. It uses OEM direct replacement mounting and fits 2WD and 4WD applications. Travel and overall lengths depend on the application.
Key features
- Internal reservoir design
- Black and aluminum finish
- 2.0 inch body diameter
- 5/8 inch shaft diameter
- OEM direct replacement mounting
Choosing the right setup
A shock is only one part of how a vehicle rides. The springs, bushings and tire size all affect how the shock works, so a good match means the shock suits the rest of the suspension as well as the mounts. Keep the original spring rates and ride height in mind when you compare options.
For 2WD and 4WD use, the main difference is usually the mounting setup and the travel the vehicle needs, not the damping style. If you add a lift or bigger tires, the shock may need to reach farther, so check the installed length against your new geometry before you buy. Off-road driving also puts more load on the eyes and bushings, so inspect them more often.
- Measure the installed length of the current shock
- Check the eye style and bushing size at each end
- Look for stiffer or softer damping needs based on use
- Replace bushings and hardware when the shock is replaced
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-24-644 |
| UPC | 70000554458 |
| Series | 2.0 Performance Series |
| Finish | Black and aluminum |
| Body diameter | 2.0 inch |
| Shaft diameter | 5/8 inch |
| Reservoir | Internal |
| Travel | Application specific |
| Extended length | Application specific |
| Collapsed length | Application specific |
| Drive | 2WD and 4WD |
Vehicle fitment
Measure your current shock before ordering, since travel and lengths depend on the application. Compare the mounting points and lengths before choosing this part.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a separate item, so confirm any other components your application needs before installing it.









