Overview
The Fox Racing Shox 2.0 Performance Series IFP shock, part number 980-24-664, is a direct-replacement shock with a 2.0 in. body diameter and a 5/8 in. shaft. Fox says its direct replacement shocks bolt on in a simple OEM-style mounting.
The shock has a black and aluminum finish, an internal reservoir and gas charging. Its travel, extended length and collapsed length are application specific. It is a direct-replacement shock with a 2.0 in. body diameter and a 5/8 in. shaft, sold separately.
Key features
- 2.0 Performance Series, IFP design
- Body diameter of 2.0 in. with a 5/8 in. shaft
- Black and aluminum finish
- Internal reservoir
- Gas charged
- OEM direct replacement mounting
- Travel and lengths are application specific
Choosing a replacement shock
A shock controls how fast the spring compresses and rebounds, so it has a direct effect on ride, body control and tire contact on rough ground. Gas charging helps damping stay consistent when the shock heats up during repeated hard use. Internal reservoir designs give the oil more room to flow and cool than a compact body does.
When replacing shocks, most owners change them in pairs on the same axle so the two sides respond alike. Check the mounting eyes, bushings and fasteners for wear, since a worn bushing can make a new shock feel loose. Match the shock length to your suspension height so it works through its travel without bottoming out.
- Check for oil on the body or shaft
- Replace worn bushings along with the shock
- Confirm clearance through full travel
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-24-664 |
| UPC | 70000597178 |
| Product type | IFP shock absorber |
| Shock series | 2.0 Performance Series |
| Body diameter | 2.0 in. |
| Shaft size | 5/8 in. diameter |
| Finish | Black and aluminum |
| Reservoir | Internal |
| Hydraulic / gas charged | Gas charged |
| Travel | Application specific |
| Extended length | Application specific |
| Collapsed length | Application specific |
| Mounting | OEM direct replacement |
| Sold | Separately |
| Fit type | Direct fit |
Vehicle fitment
The shock is a direct fit. Its travel and lengths vary by application, so match them to your vehicle before choosing this part number.
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Suspension components affect steering, braking and handling, so professional installation is strongly recommended. Support the vehicle on jack stands rated for its weight, never on a jack alone. Tighten every fastener to the specified torque and use the hardware called for during installation. Re-check all fasteners after the first few miles of driving. Have the alignment checked after any suspension work, and confirm brake line, cable and driveshaft clearance through the full range of travel. Check local regulations on vehicle height and lift limits.
What’s included
Each order contains one shock, sold separately. Check the mounting hardware against your installation before starting.








