Overview
The Fox Racing Shox 2.0 Performance Series Coilover IFP Shock, part number 983-02-051, is a gas-charged, hydraulic coilover for off-road and performance suspensions. It sits in the same 2.0 Performance Series coilover IFP line as the other shocks in this family.
Its billet aluminum components are black anodized 6061-T6, and the shaft is 5/8 inch hard chrome. An internal reservoir keeps shock oil separate from the high-pressure nitrogen, and a race-developed high-flow piston works with a redundant sealing pack. It is a direct fit shock, but no vehicles, years or chassis codes are named, so confirm your application first.
Key features
- Race-developed high-flow piston design
- Redundant sealing pack system
- Black anodized 6061-T6 billet aluminum components
- 5/8″ hard chrome shaft
- Internal reservoir separating oil and high-pressure nitrogen
- Gas-charged hydraulic coilover format
Sealing and oil care
Coilover shocks rely on seals to keep oil and gas in separate chambers. A redundant sealing pack adds a second line of defense when grit and water reach the shaft, but seals still wear over time. Wipe the shaft after off-road use and keep dust out of the shaft area to slow seal wear.
A gas-charged design holds nitrogen under high pressure, so the shock should be serviced by a qualified shop rather than opened at home. Keep the mounting ends clean and lubricated where the design calls for it. Check the body for oil seepage after each trip, since a slow leak can reduce damping.
- Inspect the shaft for pitting
- Look for oil on the body after trail runs
- Clean dirt from the shaft after mud use
- Replace worn mount bushings
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 983-02-051 |
| UPC | 70000618116 |
| Series | 2.0 Performance Series Coilover IFP |
| Shaft diameter | 5/8″ hard chrome |
| Materials | Black anodized 6061-T6 billet aluminum components |
| Shock type | Hydraulic, gas charged |
| Mount style and length | Measure the mounting ends of the current shock before ordering. |
Vehicle fitment
Fitment is not published for 983-02-051. The Direct Fit label is the only fitment statement, and it names no model, year or chassis code, so a vehicle match is not confirmed here.
Mount style and collapsed length decide whether a coilover clears your setup. Verify the fit against your year, model and trim before buying.
Installation notes
Measure the existing shock’s mounting ends and collapsed length before swapping, because none of those dimensions are supplied for 983-02-051. Lift the vehicle safely and block the wheels before starting work on the suspension.
What’s included
Review the box contents on arrival before installing the shock.
Not included: Confirm whether a spring or bracket hardware is in the box before installing.









