Overview
The Fox Racing Shox 2.0 Series Coilover Emulsion Shock, part number 980-02-011, is a non-reservoir gas charged coilover shock with 14.0 inches of travel, a 35.10 inch extended length and a 21.15 inch collapsed length.
Spring and shock pairings are developed with leading spring manufacturers for daily driving through weekend off-road use. It is a universal fit coilover, so measure your mounting points before choosing it.
Key features
- Non-reservoir design
- Gas charged construction
- 14.0 inches of travel
- 7/8 inch shaft diameter
- 1/2 inch bolt and Heim mounting
Measuring before you buy
A coilover is only as useful as its fit, so measure the installed length, the shaft diameter and the mount hardware before ordering. Spring rate, ride height and damping work together, and changing one can shift the others. Compare the spring seat and lower mount position on your vehicle before buying a replacement.
Coilover setups are often used with lift or lowering changes, which alter the working length. Recheck clearance at full bump and full droop after any change. If the design uses bushings or Heim joints, keep them free of grit and replace worn joints before they play into the mounting holes.
- Measure the installed length
- Confirm shaft diameter and bolt size
- Check the spring seat and lower mount position
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-02-011 |
| UPC | 70000587657 |
| Series | 2.0 Series Coilover Emulsion Shock |
| Body diameter | 2.0 inch |
| Travel | 14.0 inch |
| Shaft size | 7/8 inch diameter |
| Extended length | 35.10 inch |
| Collapsed length | 21.15 inch |
| Reservoir | None (non-reservoir) |
| Mounting | 1/2 inch bolt / Heim |
| Finish | Black and zinc |
| Charge | Gas charged |
Vehicle fitment
Vehicle applications are not established for this coilover, so confirm fit for your year, model and trim before ordering. Compare the 35.10 inch extended and 21.15 inch collapsed lengths with your current shock.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that your mounting points accept a 1/2 inch bolt and Heim joint before installing, and confirm the collapsed and extended lengths leave room for your suspension travel.
What’s included
Check the package contents against your installation before starting.







