Overview
The 8430152 is a Super 10 Series muffler with a short single chamber body and 409S stainless steel construction. It is universal fit, so no particular make, model or year applies.
Flowmaster designed the Super 10 line to sound as close to open pipe as possible, and it uses the Delta Flow technology from the Super 40 and Super 44 mufflers. The manufacturer advises against using it on street-driven vehicles.
Key features
- Delta Flow performance technology from the Super 40 and Super 44 designs
- Durable 409S stainless steel body
- Short single chamber layout
- Inlet and outlet configurations that vary by option
Choosing outlet position
The outlet position on a muffler decides where the tailpipe ends up and how much clearance the rear of the vehicle needs. Before buying, measure the distance from the old muffler outlet to the rear bumper and any spare tire or hitch. A short body helps in tight spaces, but the mounting points still need to line up with existing hangers.
Single chamber mufflers can sound harsher than multi chamber designs, which matters if the vehicle is driven daily. Stainless steel resists rust well, so it suits wet or salted roads, but the joints and clamps still need checks each season.
- Measure outlet height and angle
- Check hanger points before cutting
- Allow room for heat shields
- Re-tighten clamps after a few heat cycles
Specifications
| Brand | Flowmaster Exhaust |
|---|---|
| Part number | 8430152 |
| UPC | 700042023950 |
| Series | Super 10 (Super Ten) |
| Material | 409S stainless steel |
| Chamber design | Single chamber, short body |
| Inlet/outlet | Variety of configurations offered |
Vehicle fitment
Because no specific vehicle is named, treat this muffler as a fit-by-measurement part. Compare the outlet position, body length and pipe diameter with the exhaust you have now.
Fitment is not tied to a named vehicle. Confirm the year, model and trim for your car before ordering.
Installation notes
Cut the existing exhaust at a clean point, fit the Super 10 body in line, and weld or clamp each joint. Check that the body clears the chassis and any heat shields.
What’s included
Hardware for the joints is not included, so plan to source it separately.
Not included: exhaust pipe and the joining hardware for your vehicle.









