Overview
The Flowmaster 70 Series Big Block II Muffler, part number 52572, is a chambered aluminized steel muffler with a centered inlet, an offset outlet and 2.5 inch tubes. It uses a longer case than the 50 Series Big Block, which Flowmaster says adds volume and sound reduction.
The 70 Series Big Block II is aimed at high performance street cars, most trucks, SUVs, RVs and tow vehicles that need quiet operation. The longer case fits some applications where the wider 50 Series Big Block does not, which helps when space is tight.
Key features
- Longer case for added volume and sound reduction
- Fits some applications where the wider 50 Series Big Block does not
- Delta Flow technology for efficiency and minimum interior resonance
- Centered inlet with offset outlet
- 2.5 inch inlet and outlet tubes
Matching a muffler to your use
Choosing between a long-case and a wide-case muffler comes down to the space available and the kind of driving planned. A longer case adds internal volume, which helps with sound reduction, but it also needs a clear run under the vehicle. For towing and RV use, the exhaust sees heavier loads and longer hours, so the connection points need extra attention.
Long-term performance depends on regular inspection. Check the case for road damage, and look for signs of exhaust leaks at the joints, such as soot marks or ticking at idle. Re-torque or re-clamp connections after the first few trips, since the exhaust moves as the engine and body flex under load.
- Measure the mounting space before buying
- Recheck clamps after the first few trips
- Look for soot marks that signal a leak
Specifications
| Brand | Flowmaster Exhaust |
|---|---|
| Part number | 52572 |
| UPC | 700042014439 |
| Series | 70 Series Big Block II |
| Muffler type | Chambered |
| Inlet location | Centered |
| Outlet location | Offset |
| Material | Aluminized steel |
| Tube size (inlet/outlet) | 2.5 inches / 2.5 inches |
Vehicle fitment
This muffler suits a broad range of vehicles without being tied to one year, make or model. Its intended uses are high performance street cars, most trucks, SUVs, RVs and tow vehicles.
Measure the mounting space, since the longer case may not suit every application. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a universal fit muffler, so it is joined into the existing exhaust rather than bolted on. Check that the offset outlet points the right way for your tailpipe route before cutting the pipe, and use clamps or welds that suit the 2.5 inch tubes.
What’s included
This entry covers the muffler only. Not included: The muffler is the only item included. Plan on supplying your own pipe, hangers and clamps.












