Overview
The Flowmaster 50 Series Delta Flow muffler, part number 842551, is a compact muffler designed for passenger cars rather than trucks or SUVs. It is a three-chamber design that aims to lower interior sound and resonance while keeping a moderate exterior tone.
The 50 Series is built around a Resonance Tuning Chamber. Its three-chamber layout is designed to deliver performance comparable to two-chamber mufflers and to support engine efficiency for better power and mileage.
Key features
- Three-chamber design with a Resonance Tuning Chamber
- Compact exterior case sized for passenger cars
- Moderate exterior tone with reduced interior sound and resonance
- Manufacturer-stated gains in engine efficiency, power and mileage
Compact passenger car exhaust
A compact muffler on a passenger car leaves limited room for the pipe run, so small differences in case size and outlet position can matter. Check the route under the car for clearance around the floor, axle and frame before committing to a layout.
Resonance and interior sound are shaped by the internal chambers, the pipe routing and the way the muffler mounts. Keeping the hangers firm and avoiding sharp bends in the pipe helps the system behave as designed.
For a daily driver, tone is often part of the appeal, so consider how the exhaust sounds at highway speed as well as at idle. Inspect the muffler and joints once a season for rust or loose clamps.
- Check floor, axle and frame clearance
- Keep hangers firm and bends gentle
- Inspect joints each season
Specifications
| Brand | Flowmaster Exhaust |
|---|---|
| Part number | 842551 |
| UPC | 700042018444 |
| Series | 50 Series Delta Flow |
| Chambers | Three |
| Case | Compact exterior case size |
| Intended vehicles | Passenger cars rather than trucks or SUVs |
Vehicle fitment
It is a universal fit muffler. Because it is designed for passenger cars, check that the pipe diameter and outlet position suit your car before buying.
This 50 Series muffler has no vehicle-specific listing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the case is compact, check that the body clears your floor pan, axle and frame when you plan the pipe run. Measure the inlet and outlet before cutting, and have a shop weld any joints.
What’s included
Check the package contents against your installation before starting.
Not included: exhaust pipe and connection parts needed for installation.









