Overview
The Flowmaster Super 10 Series muffler, part number 842516, is a short, single chamber exhaust muffler built from 409S stainless steel. It is a universal fit design, so it is not matched to one vehicle model. It is not intended for street-driven vehicles because its sound is very aggressive.
The Super 10 Series, also called Super Ten, uses the same patented Delta Flow performance technology as Flowmaster’s Super 40 and Super 44 mufflers. The short body is designed to sound as close to open pipe as the design allows, which is the main reason it is aimed at drivers who want a loud, direct exhaust note.
Key features
- Patented Delta Flow performance technology
- Durable 409S stainless steel construction for long life
- Short, single chamber body with a near open-pipe sound
- Offered in a variety of inlet/outlet configurations
Universal fit exhaust work
Universal fit mufflers are shaped for a range of systems, so the fit depends on the pipes they join. The inlet and outlet size, the body length and the hanger points all need to suit the existing exhaust before the part is fixed in place.
Many installers measure the whole run first, then cut and weld the joints in a single session to limit the number of hot passes. Check each joint carefully for leaks once the system has cooled.
Old hangers and worn clamps should usually be replaced when the muffler changes, since they cost little compared with the time spent rerouting pipe. Route the pipe so it stays clear of the floor, axle and fuel lines.
- Measure before any cutting
- Replace worn hangers and clamps
- Leak-check every joint
Specifications
| Brand | Flowmaster Exhaust |
|---|---|
| Part number | 842516 |
| UPC | 700042030460 |
| Series | Super 10 (Super Ten) |
| Material | 409S stainless steel |
| Chamber design | Single chamber, short body |
| Inlet/outlet | Variety of configurations offered; confirm the one you need |
Vehicle fitment
It is a universal fit muffler, not made for a specific year, make or model. Inlet and outlet sizes, body length and hanger points must match your current exhaust.
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Plan to join this universal muffler to your existing pipe by clamping or welding, and check the inlet and outlet diameters before cutting anything. Exhaust cutting and welding are best handled by an installer with the right equipment.
What’s included
Check the package contents against your installation before starting.
Not included: exhaust pipe and the clamps or connection parts needed to join the muffler to your system.









