Overview
The Flowmaster Super 10 Series Muffler, part number 8425154, is a single chamber muffler made from 16-gauge 409S stainless steel and fully MIG-welded. Flowmaster intends it for owners who want the loudest and most aggressive sound the brand offers.
It is for off highway use only and is not intended for street driven vehicles. It uses the Delta Flow technology found in other Super series mufflers, is manufactured in the USA and carries the Flowmaster Lifetime Limited Warranty.
Key features
- 16-gauge 409S stainless steel body
- Fully MIG-welded construction
- Single chamber design
- Delta Flow technology
- Manufactured in the USA
- Universal fit listing
Off-road sound and care
A single chamber muffler gives a direct, loud tone because the exhaust gas passes through one main space rather than a series of chambers. That makes it a common choice for off-road builds where volume matters more than quiet operation. Expect more drone at highway speeds, and consider where the exhaust exits relative to passengers and trail obstacles.
Stainless steel resists rust well, but road salt, mud and rock strikes still take a toll on the body and welds. After each trip, rinse the muffler and look for dents, scraped welds and any changes to the seam. Stainless can discolor with heat, which is normal for stainless exhaust.
Off-road use often puts stress on hangers and clamps. Check them regularly, and consider replacing hangers and clamps when you fit a new muffler, since worn supports can crack the body or pull on the joint.
Specifications
| Brand | Flowmaster Exhaust |
|---|---|
| Part number | 8425154 |
| UPC | 700042031375 |
| Series | Super 10 |
| Muffler type | Single chamber |
| Material | 409S stainless steel, 16-gauge |
| Construction | Fully MIG-welded |
| Country of manufacture | USA |
| Warranty | Flowmaster Lifetime Limited Warranty |
| Recommended use | Off highway use |
Vehicle fitment
It is built as a universal fit muffler, so it is not sized for a specific year, make or model. Its intended use is off highway, so match it to an off-road vehicle and confirm pipe sizes before fitting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Universal fit mufflers join into the existing exhaust, so plan on matching pipe diameters and cutting into the system. The muffler body is fully MIG-welded, but the connection to your pipe still needs to be clamped or welded cleanly and checked for leaks.
What’s included
This entry covers the muffler only. Not included: This package covers the muffler only; pipe, hangers and clamps must be sourced separately.









