Overview
The Flowmaster 842518 is a Super 10 Series muffler, a short single chamber unit made from 409S stainless steel and sold as universal fit. It is designed for a very aggressive exhaust note and is not intended for street-driven vehicles.
Delta Flow performance technology, the same design used in the Super 40 and Super 44 Series, sits inside this Super Ten body. The short case is designed to sound as close to open pipe as the design allows.
Key features
- Delta Flow performance technology carried over from the Super 40 and Super 44 lines
- 409S stainless steel body for long-term durability
- Short single chamber layout for a near open-pipe tone
- Several inlet/outlet configurations available
Before you buy a loud muffler
A muffler built for a very aggressive note works best when the rest of the exhaust matches its purpose. Pipe diameter, outlet placement and the number of joints shape the tone and the flow, so plan the whole layout instead of focusing on the muffler alone.
Consider how often the car will be driven on public roads, how much noise is acceptable in the area and whether the vehicle will be used off road or at a track. Each use changes which exhaust parts make sense.
Keep the cutting and welding in the hands of an experienced shop where possible. Clean, well-fitted joints last longer and make it easier to tune the sound later if you decide to change the setup.
- Plan the whole exhaust layout first
- Consider local noise rules
- Use an exhaust shop for welding
Specifications
| Brand | Flowmaster Exhaust |
|---|---|
| Part number | 842518 |
| UPC | 700042023929 |
| Series | Super 10 (Super Ten) |
| Material | 409S stainless steel |
| Chamber design | Single chamber, short |
| Inlet/outlet | Available in a variety of configurations |
Vehicle fitment
No single vehicle is named for this muffler. Flowmaster classifies it as universal fit, so the match depends on your exhaust layout, including pipe diameter and the position of the outlet.
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Expect to cut your existing pipe and weld or clamp this muffler in place, with hangers reattached afterward. Measure the inlet and outlet before you cut, and have an exhaust shop handle any welding.
What’s included
Check the package contents against your installation before starting, since clamps and hangers may be needed.
Not included: the exhaust pipe and connection hardware needed to attach the muffler to your vehicle.









