Overview
The Flex-A-Lite 485 High Performance X-TREME is a custom shrouded S-blade electric cooling fan for 1987-06 Jeep Wranglers with 4- or 6-cylinder engines. It mounts directly to the factory radiator mounting points with solid brackets.
The fan moves 3300 cubic feet per minute and draws 18 amps. It is designed to dissipate more heat than competing 16 inch fans and shares its feature set with the 180 Black Magic X-TREME fan.
Key features
- S-blade fan with a custom shroud
- Solid brackets mount to the factory radiator mounting points
- Moves 3300 cubic feet per minute
- Draws 18 amps
- It is designed to dissipate more heat than competing 16 inch fans.
- Same features as the 180 Black Magic X-TREME fan, per the manufacturer
Electrical setup
An 18 amp fan draws a meaningful load, so the wiring has to be sized for it from the battery to the fan. Use a fused circuit rated above the fan’s draw, keep connections tight, and make sure the ground connection is clean and bolted to bare metal. Voltage drop at a weak connection can slow the fan and reduce cooling just when the engine is working hardest.
A thermostat or switch controls when the fan runs. Set it so the fan starts when the engine reaches its normal operating temperature, not earlier, and check the sensor if the fan runs constantly or never starts. Route the wiring away from belts, the exhaust and the fan blades, and secure it with clips so it cannot chafe.
Specifications
| Brand | Flex-A-Lite |
|---|---|
| Part number | 485 |
| UPC | 8865700485 |
| Product line | High Performance X-TREME |
| Blade style | S-blade |
| Shroud | Custom shrouded |
| Airflow | 3300 cubic feet per minute (cfm) |
| Current draw | 18 amps |
| Mounting | Solid brackets to O.E. radiator mounting points |
| Engine | 4 or 6 cylinder |
Vehicle fitment
It fits 1987-06 Wranglers with 4- or 6-cylinder engines, covering the YJ generation (1987-1995) and the TJ generation (1997-2006).
It is not made for JK, LJ or later Wranglers, Cherokee or Gladiator. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Part #30928 is required for installation and is a separate part, so have it on hand before mounting the fan. Because the fan draws 18 amps, route its power through a fused circuit and keep the wiring clear of the blades.
What’s included
The fan comes with solid brackets for mounting.
Not included: Part #30928, a separate part required for installation.












